The reference I have used for years is:
I bought a one-piece 3-axis meter for about $150 from these folks about
a decade and a half ago.
This looks like a good choice at $150
XYZ Axis EMF Tester (Cat. #A194)
However, the unit I have I think goes out to higher harmonics which
might be interesting with large three-phase power installations, so
another choice on the same page for $269, but it may be overly sensitive
and not be able to measure higher strength fields discussed in the paper.
3-Axis Backlight Gaussmeter (Cat. #A107)
For $300 it looks as if this might be closest to what I had and found
Switchable 1:3 Axis Gaussmeter (Cat. #A153)
Though for $200 you can get this:
Datalogging 3-Axis Gaussmeter w/ PC (Cat. #A494)
On 7/18/2016 9:59 AM, Carla Arton wrote:
> Hello all,
> Our processing area is being temporarily relocated next to some breaker
> boxes and I wanted to make sure there wasn't a magnetic field from those or
> other things in the work space that could affect any video or magnetic
> audio we are processing.
> What is the threshold we should be concerned about if we were to get a
> magnetometer out there to test the space? A link to a resource about this
> topic would be greatly appreciated as well.
> Thank you in advance,
> Carla Arton
> Film Digitization Specialist
> Indiana University Libraries Moving Image Archive
> [log in to unmask]
Richard L. Hess email: [log in to unmask]
Aurora, Ontario, Canada 647 479 2800
Quality tape transfers -- even from hard-to-play tapes.