The feature film industry uses 0VU =-20DBFS at the A/D con
The feature film industry uses 0VU =-20DBFS at the A/D converters. 0VU = +4dBm.
For "effects heavy" film sound tracks that were archived on magnetic film, we will lower the output of the Dolbys 3dB (nearly everything was Dolby encoded since the introduction of Dolby A type noise reduction) and note that the reference level is -23DBFS.
Corey Bailey Audio Engineering
From: Henry Borchers <[log in to unmask]>
To: [log in to unmask]
Sent: Friday, October 19, 2012 6:51 AM
Subject: [ARSCLIST] Analog to digital dBFS standards
I've been hitting a brick wall with my research and I was hoping that with all the experts here, someone could point me in the right direction. I’m currently looking for research done on digital reference levels. I am particularly interested in looking for references related to the amount of headroom standards digital audio archivists and audio digitization technicians use in their digital masters and the digital level dBFS that analog equipment have been calibrated to. I’ve been able to find a lot of references about dBFS standards when it comes to audio for DVD, TV, and cinema (such as SMPTE standards) but not much for the digitization of audio only content. I have been having trouble locating good research regarding this area and I was hoping someone here could point me in the right direction..
Broadcast Media Digitization Librarian
University of Maryland
B0221D McKeldin Library
College Park, MD 20742