Hello Richard
No. I came across this while surfing B&H. To shoot flat art I use the
procedure described earlier.
David L
----- Original Message -----
From: "Richard L. Hess" <[log in to unmask]>
To: <[log in to unmask]>
Sent: February 07, 2006 11:09 AM
Subject: Re: [ARSCLIST] Copying LP covers
> At 03:45 PM 2/7/2006, David Lewiston wrote:
>>If the other solutions aren't suitable, take a look at this Testrite Copy
>>Stand.
>>
>>http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=53762&is=REG&addedTroughType=search
>
> David, do you have one of these? I do and the arm is very prone to
> vibration. The lights are OK, but the arm needs more
> reinforcement...someday. It's just a flat piece of steel, no angle or rib
> or anything. Think TWANG.....at least on the one I have.
|