You may be able to get some of it back by putting a bit of vasolene un the
underside of the lifted sections- just a bit. You can then line up a groove
and, if it becomes too discontinuous, you can slide it over a hair. Record
what you are playing on a hard drive and paln to do considerable editing.
----- Original Message -----
From: "David Lennick" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, February 24, 2006 10:25 AM
Subject: Re: [ARSCLIST] Question re DuoDisc records
>A lot of these very thin aluminum home recording discs are flaking, and not
> DuoDisc. RecorDisc (orange label), Presto orange label (too bad, those
> were made
> by a professional company but they're just as prone) and others. As for
> being "quiet", any I've ever seen over the last 50 years have been so
> warped and
> bumpy, noise level was generally way down on the list of
> them to track was more of a problem, and this was in the 50s when they
> have been more than a few years old and you wonder how new ones were ever
> enough to be recorded on in the first place.
> There have been attempts made to re-attach flaked portions, but be aware
> that if
> the disc is flaking, the surface material has already shrunk and the
> will never line up completely.
> David Lewis wrote:
>> Yes - I am familiar with DuoDiscs. These are cheaply made,
>> discs. The first "homemades" I ever owned were a pair of these given to
>> by a family friend thirty years ago. What the correspondent calls "vinyl"
>> actually the lacquer coating on the outside of the aluminum center, and
>> it is already peeling there is little hope for it.
>> This is a pity - Duodiscs have fairly quiet surfaces for homemades, but
>> appears most of the ones I see nowadays are on their way out - it appears
>> per cent of them are flaking off. And these always seemed so durable,
>> steel-base Carr-O-Tones and others which rust and usually prove
>> anyway. As there are no established standards for handling these records,
>> is hard to know what to do to preserve them. The standards may well
>> too late for most DuoDiscs.
>> My advice - record the non-flaked-off portions at a very slow speed 2 or
>> times, speed up the results and edit what's left together. You may get
>> different grooves to play on different passes.
>> David N. Lewis
>> Assistant Classical Editor, All Music Guide
>> "Contemporary composers, and at least a considerable number of them,
>> what system they used, in what way they arrived at something. I do not do
>> that. I think that the matter of the way by which one arrived at
>> is, for the listeners, unimportant. What matters is the final result,
>> is the work itself." -Grazyna Bacewicz, 1964
>> -----Original Message-----
>> From: Association for Recorded Sound Discussion List
>> [mailto:[log in to unmask]] On Behalf Of Joel Ackerman
>> Sent: Thursday, February 23, 2006 11:47 PM
>> To: [log in to unmask]
>> Subject: [ARSCLIST] Question re DuoDisc records
>> Am asked the following question:
>> Are you familiar with those "DuoDisc" type records? They have an
>> center (substrate) and a thin coat of vinyl (I think) on top of the
>> aluminum. I believe they are records people made home recordings on.
>> Anyway I have two (or three) of them and the vinyl is peeling off the
>> aluminum. I was wondering if you knew anything about, perhaps, repairing
>> the peel?
>> Looking at photos, it appears that the vinyl is coming apart - cracking
>> heading towards eventual peeling off,.
>> Suggestions welcome.
>> Joel Ackerman
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 268.0.0/268 - Release Date: 2/23/2006