With permission from Stan Ricker:
----- Original Message -----
From: "Stan Ricker"
Ya--------part of the cutter-amp circuitry; in a plug-in card, in the
Neumann case, the amount of "pre-distort" is diameter-dependent, triggered
by many microswitches along the sled-path.......just before the RIAA eq...
> phillip holmes wrote:
>> So the Dynagroove process was at the mastering end of things (between the
>> tape deck and the cutter head)?
----- Original Message -----
From: "Stan Ricker"
To: "phillip holmes"
>>> NEUMANN CALLED THIS "PREDISTORT" CIRCUIT" A "TRACING SIMULATOR"----AND
>>> NOBODY LIKED IT EITHER.........THE TELDEC SYSTEM MENTIONED BELOW IS THE
>>> NEUMANN SYSTEM..............THANK GOODNESS "DYNAGROOVE" WAS ONLY
>>> MASTERING,
>>> AND NOT ORIGINAL RECORDING AS WELL...........STAN
>>>
>>> phillip holmes wrote:
>>>
>>>> Do you know if the pre-distortion on the Dynagroove pressings were on
>>>> the tapes or done by the mastering engineers? Enquiring minds want to
>>>> know.
>>>> Phillip
|