In my experience, this is not a problem if the studio is wired up by someone
proficient in grounding. Check with your local commerical audio/instrument
store that does high-end installations, not your hi-fi shop. The former
will have guys on call who are experts at that.
----- Original Message -----
From: "Kurt Nauck" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 18, 2006 1:56 PM
Subject: [ARSCLIST] Audio equipment cable shielding
> We are doing some re-arranging of our studio here at the shop. We're
> encountering hum from the audio cables being in proximity of power cables
> and possibly from florescent lighting (!) Is there some way to shield
> audio cables from the influence of power sources? I've read that one
> should always cross audio and power cables rather than having them run in
> parallel. Any suggestions would be appreciated!
> Kurt & Diane Nauck
> c/o Nauck's Vintage Records
> 22004 Sherrod Ln.
> Spring, TX 77389
> Website: www.78rpm.com
> E-Mail: [log in to unmask]
> Phone: (281) 288-7826
> Fax: (425) 930-6862
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.4.3/317 - Release Date: 4/18/2006