You MUST keep the turntable close to the preamp ! No more than a foot or two away. And with SHORT cables- coiling them up is NOT good! This applies to the Archeophone too ! ( I know you have one, which is why I mentioned this)
Anything else will be fatal to the signal .
It doesn't matter what you use - the low level of signal that a cartridge
generates requires a high level of preamplification which requires a preamp of very high gain. This gain makes hum a very easy thing to pick up.
Belfer Audio Archive
222 Waverly Ave .
Syracuse N.Y. 13244-2010
>>> [log in to unmask] 4/19/2006 8:53 AM >>>
At 01:21 PM 4/18/2006, you wrote:
> > We are doing some re-arranging of our studio here at
> > the shop. We're encountering hum from the audio
> > cables being in proximity of power cables and possibly
> > from florescent lighting (!)
>Are the audio cables balanced?
No, unfortunately. If I use an rca to xlr cable converter, can I carry a
balanced signal from my turntable to my preamp, or do I need a special device?
Kurt & Diane Nauck
c/o Nauck's Vintage Records
22004 Sherrod Ln.
Spring, TX 77389
E-Mail: [log in to unmask]
Phone: (281) 288-7826
Fax: (425) 930-6862