yeah, I'm not a big believer in "tube rolling", but that's a whole other topic. I have pretty good
ears and I hear very little differences between tubes except when one is bad (tests bad) and one is
good, or one is microphonic and one isn't. But then I don't like tube amps that "warm" (ie add a
noticeable amount of harmonic distortion) the sound. I like accurate amps. Some are tube, some are
solid-state. Depends on the input device and the speakers.
One of my more "audiophillic" friends was trying to prove to me how much difference there was in
tubes using his "line stage" (ie distortion-adder since the clean way to switch between line-level
sources is, well, a passive switch). All I could hear was how hummy his system was. But he's my
friend and he paid lots and lots of cash for that thing so I just nodded my head and said, uh huh.
-- Tom Fine
----- Original Message -----
From: "phillip holmes" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, June 20, 2006 12:43 AM
Subject: Re: [ARSCLIST] Stereo records.
> Yes, where would I have come up with this? We all stand on other's shoulders. But even if I
> didn't read VTV and other fine publications, the observant tube collector can spot a Euro tube in
> American clothing. The worst is opening up a new eBay purchase to realize you just paid $40 for a
> counterfeit Telefunken, a Russian tube that can be had for $4.
> Phillip
> ----- Original Message -----
> From: "Tom Fine" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, June 19, 2006 6:48 PM
> Subject: Re: [ARSCLIST] Stereo records.
>
>
>> There was an article about this in the late Vacuum Tube Valley magazine. Eric Barbour, who used
>> to contribute to them often, is quite well-informed on both ye olde dayes and modern tube
>> production details.
>>
>> -- Tom Fine
>>
>> ----- Original Message -----
>> From: "Roger and Allison Kulp" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, June 19, 2006 6:43 PM
>> Subject: Re: [ARSCLIST] Stereo records.
>>
>>
>>>I loooove this list!!!!
>>> Where else are ya gonna learn this sort of stuff . Roger Kulp
>>>
>>> phillip holmes <[log in to unmask]> wrote:
>>> RCA, even after it bought Victor, sourced many of its tubes from other
>>> vendors. You'll see tubes made in Holland and Germany, rebranded RCA. It
>>> came down to who had which tube type up and running on their lines. They
>>> didn't like switching over production from one type to another. And from
>>> what I understand of tube manufacturing, most all tube manufacturers in the
>>> USA bought their tube parts from Sylvania, especially cathode assemblies and
>>> grid wire. The manufacturing of the individual parts required much greater
>>> attention to detail than the assembly of the tubes.
>>> Phillip
>>> ----- Original Message -----
>>> From: "David Breneman"
>>> To:
>>> Sent: Sunday, June 18, 2006 1:02 AM
>>> Subject: Re: [ARSCLIST] Stereo records.
>>>
>>>
>>>> --- Michael Shoshani wrote:
>>>>
>>>>> You know what? I completely forgot about that. Did they include
>>>>> radios? Or was that left for a third party installation?
>>>>
>>>> RCA provided the radios to Victor to install in the
>>>> machines; but before RCA bought Victor, RCA didn't have
>>>> much of any manufacturing capability to speak of. Most
>>>> RCA-badged equipment was acutally manufactured by GE or
>>>> Westinghouse and marketed be RCA.
>>>>
>>>> Ironically, much like with the licensing arrangement with
>>>> Thompson today.
>>>>
>>>>
>>>> David Breneman [log in to unmask]
>>>>
>>>> __________________________________________________
>>>> Do You Yahoo!?
>>>> Tired of spam? Yahoo! Mail has the best spam protection around
>>>> http://mail.yahoo.com
>>>>
>>>>
>>>
>>>
>>>
>>> ---------------------------------
>>> Yahoo! Sports Fantasy Football '06 - Go with the leader. Start your league today!
>>
>>
|