LISTSERV mailing list manager LISTSERV 16.0

Help for ARSCLIST Archives


ARSCLIST Archives

ARSCLIST Archives


[email protected]


View:

Message:

[

First

|

Previous

|

Next

|

Last

]

By Topic:

[

First

|

Previous

|

Next

|

Last

]

By Author:

[

First

|

Previous

|

Next

|

Last

]

Font:

Monospaced Font

LISTSERV Archives

LISTSERV Archives

ARSCLIST Home

ARSCLIST Home

ARSCLIST  July 2007

ARSCLIST July 2007

Subject:

Re: Moldy Tapes

From:

Martin Fisher <[log in to unmask]>

Reply-To:

Martin Fisher <[log in to unmask]>

Date:

Wed, 11 Jul 2007 09:30:46 -0500

Content-Type:

text/plain

Parts/Attachments:

Parts/Attachments

text/plain (99 lines)

Hi Guys,

Thanks for all the input on the moldy tape query.

The tapes in question are 7 inch X 1/4 inch reels of field interviews done in the eighties. The boxes don't necessarily match the tape stock since most of the tapes are tails out and I think the reels and boxes were shuffled by using the former supply reel as takeup for the next go-round. Stock seems to consist mainly of Scotch 206, Maxell XL1 35-90B and a generic nonbackcoated 1.5 mil tape on smoky, very nonprecision and nondescript reels in white boxes. (I've run into this same white box type stuff before at the Tennessee State Library and Archives.) No acetate stock encountered so far.

I've cleaned and transferred about ten out of fifty by doing an initial out of the box cleaning of the reel and pack and outer turn layers, then a fast forward "dry wipe" followed by a spot wet cleaning (and drying) using tap water on heavily contaminated areas. (Not the most scientific method but this is a low budget job and seems to work fine for transfer as all of the tapes play fine with no perceptible problems.)

Best!!

Martin
  ----- Original Message -----
  From: [log in to unmask]
  To: [log in to unmask]
  Sent: Tuesday, July 10, 2007 1:35 PM
  Subject: Re: [ARSCLIST] Moldy Tapes


  Steve:

  As Eric mentions, long-term-low-humidity exposure will reduce "sticky shed".
  It just takes a lot longer than "baking" and has some other side effects on
  really bad tapes: if the tape is badly enough hydrolyzed that it has
  "blooming" [actual "puddles" of oligomer residue] on the surface, it can
  cause cross-linking of the oligomers without re-absorption into the binder
  matrix. This can result in areas of hardened polymer on the surface of the
  tape and, in the most severe cases, can "weld" wraps together. Note:
  "blooming" is most common on 2" tape.

  One of the benefits of low-humidity treatment (especially when combined with
  temperature reduction) is that the primary vector of expansion and
  contraction of magnetic tape with either humidity or temperature changes is
  THICKNESS. Unfortunately, if you reduce humidity by "baking", the reduction
  in tape thickness from the reduced humidity is off-set by the increase in
  tape thickness caused by the raised temperature.

  Because of this, low humidity treatment will shrink the thickness of the
  tape and loosen the pack while it is also reducing the effects of "sticky
  shed". When treating tapes with both fungus and sticky-shed for shorter
  times (8-10 days), the slight reduction of the sticky-shed, along with the
  loosening of the pack, can often result in a tape that can be slowly unwound
  for cleaning. Once the majority of the fungus residue is removed, a tape
  with bad sticky-shed can then be baked if needed for playback. The order of
  treatment (heat, cold, low humidity, vacuum, dry wiping, wet wiping, etc.)
  and the number of treatments depends on the specific condition of each tape.

  As Eric also points out, the actual removal of the mold is another matter
  and can present serious health hazards if not done under controlled
  conditions.

  Hey- no one said that restoring tape "the right way" is easy.

  Peter Brothers
  SPECS BROS., LLC
  973-777-5055
  [log in to unmask]

  Tape restoration and disaster recovery since 1983

  -----Original Message-----
  From: Association for Recorded Sound Discussion List
  [mailto:[log in to unmask]] On Behalf Of Steve Puntolillo
  Sent: Tuesday, July 10, 2007 12:31 PM
  To: [log in to unmask]
  Subject: Re: [ARSCLIST] Moldy Tapes

  Hi Peter --

  Peter @ specsbros wrote:

  > To drive the mold into dormancy, it is necessary to remove
  > moisture from the mold, itself, and the tape. This can take
  > up to 8 - 10 days of holding the tape in a controlled
  > environment of around 30% RH. It can be done somewhat faster
  > at lower RH and can take quite a lot more time if the RH is higher.
  > (Note: baking is not recommended as, while it can sometimes
  > work, it can also cause problems with moldy tape- depending
  > on the type and amount of mold, baking can harden the
  > mold-related residues and "bake" wraps together).

  So, it sounds like you are recommending a low-humidity exposure at normal
  temperature for several days followed by cleaning.

  What if the tape also has a bad case of SSS? It seems as though you would be
  stopped. You can't spool it to clean it because it has SSS and you can't
  bake it to spool it because it has mold.

  What do you recommend?

  Thanks,

  -- Steve

  ========================================================
  Steve Puntolillo
  Sonicraft A2DX Lab - Ultimate A_nalog 2 D_igital X_fers
  http://www.sonicraft.com
  ========================================================

Top of Message | Previous Page | Permalink

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

March 2024
February 2024
January 2024
December 2023
November 2023
October 2023
September 2023
August 2023
July 2023
June 2023
May 2023
April 2023
March 2023
February 2023
January 2023
December 2022
November 2022
October 2022
September 2022
August 2022
July 2022
June 2022
May 2022
April 2022
March 2022
February 2022
January 2022
December 2021
November 2021
October 2021
September 2021
August 2021
July 2021
June 2021
May 2021
April 2021
March 2021
February 2021
January 2021
December 2020
November 2020
October 2020
September 2020
August 2020
July 2020
June 2020
May 2020
April 2020
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018
October 2018
September 2018
August 2018
July 2018
June 2018
May 2018
April 2018
March 2018
February 2018
January 2018
December 2017
November 2017
October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003

ATOM RSS1 RSS2



LISTSERV.LOC.GOV

CataList Email List Search Powered by the LISTSERV Email List Manager