YIKES...my splicing tape stock portfolio takes yet another hit!
208 River Ranch Rd.
Boerne, TX 78006
(830) 537-5495 [ fax ]
[log in to unmask]
----- Original Message -----
From: "Tom Fine" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, July 26, 2007 6:35 PM
Subject: Re: [ARSCLIST] Cracked Cylinder Record
> Back in ye olde tape splicing days, it took about as much time as Terry
> faces, but one cut and splice did the job for each click.
> Geeze, I hope that old timer could sing. That's a lot of work.
> -- Tom Fine
> ----- Original Message -----
> From: "Mike Richter" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, July 26, 2007 5:44 PM
> Subject: Re: [ARSCLIST] Cracked Cylinder Record
>> Robert Hodge wrote:
>>> GAD !!
>>> If Cooledit hasn't some form of sensitivity control for setting a
>>> threshold, I see a weekend of agony in your future.
>> I think you misunderstand the problem.
>> These are not clicks overlying musical material. They neither replace
>> recording nor coincide with it. Each represents the milliseconds of space
>> occupied by that pass over the crack. In other words, they are brief
>> intrusions into the flow of audio.
>> ClickFix (far better than Audition's built-in tool) or any other
>> declicker will fill in the space the click occupies with its best
>> estimate of the missing audio. What's needed is just what is being done
>> manually: excise the intrusion.
>> I know of no software for any audio editor that will do what Terry Smythe
>> needs - except the manual process he hopes to avoid.
>> [log in to unmask]