LISTSERV mailing list manager LISTSERV 16.0

Help for ARSCLIST Archives


ARSCLIST Archives

ARSCLIST Archives


ARSCLIST@LISTSERV.LOC.GOV


View:

Message:

[

First

|

Previous

|

Next

|

Last

]

By Topic:

[

First

|

Previous

|

Next

|

Last

]

By Author:

[

First

|

Previous

|

Next

|

Last

]

Font:

Proportional Font

LISTSERV Archives

LISTSERV Archives

ARSCLIST Home

ARSCLIST Home

ARSCLIST  January 2008

ARSCLIST January 2008

Subject:

Re: Ampex ATR-102 opinion (was MD5 Hash Generators

From:

Scott Phillips <[log in to unmask]>

Reply-To:

Association for Recorded Sound Discussion List <[log in to unmask]>

Date:

Mon, 21 Jan 2008 23:27:43 -0600

Content-Type:

text/plain

Parts/Attachments:

Parts/Attachments

text/plain (342 lines)

Ken,

I have overhauled several of these machines for clients over the years
from almost complete trash condition to fully reconditioned states. I am
also in complete agreement with Tom and Richard as to the ATR-102. A
wonderful sounding machine, and a pleasure to record with. Very quiet,
as well. 

I am somewhat hesitant to use them on anything I might think was old /
damaged tape or tape that hadn't been checked first for bad splices and
the like. The normal wind speeds I found a little scary, as well as the
'load' mode for the tape. That said, I thought it was certainly either
at the top of my short list of the best sounding recorders ever made or
durn near it. I really only had extensive experience with the 1/2"
equipped ATR's, and with NOS heads. The transport mechanics and
electronics were, well, a bit different than anything else.... most
certainly not for the home tinkerer to repair. Parts can have a very
steep price tag, as can service if you have to pay someone like me or
the ATR folks. (Very nice people, from my limited dealings with them)

I Highly recommend the ATR-102 for studio master recorder use, if you
are going to use analog tape. As Richard and Tom are aware, I worked for
Sony doing prototype QA on the Sony APR-5000 recorders. They are also
very good units, very good sounding, gentle on tape and very versatile
in use, but if the ultimate fidelity is what you are looking for and
price is not an object, the ATR-102 is hard to beat.... the A80 series
is not a bad place to be either. The ATR will likely hold its value
better than almost any other RTR deck... the cult following is that
strong.

In Richard's position, IMHO, he has made very good choices based on his
work load and the type of work he takes in...  an ATR still sees a good
deal of recording studio use, but it isn't that much of a format 'quick
change' artist, and stocking spares would be crazy expensive for little
advantage in his situation. I don't know as much about the work that Tom
takes in, but I imagine it is similar in many ways. Your situation ???
LOL.... well, if I had all the cash it takes and wanted a 'personal' RTR
machine, I'd take a 102 anytime. Not in my budget anytime soon
though..... :>)

Scott

-----Original Message-----
From: Association for Recorded Sound Discussion List
[mailto:[log in to unmask]] On Behalf Of Ken Fritz
Sent: Monday, January 21, 2008 8:12 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] Ampex ATR-102 opinion (was MD5 Hash Generators

   Hi Tom,

   I think it's great that this forum will, after one posting and a
reply, change the greeting from" Hello Mr Fine," to Hi Tom. I hope I'm
not taking undo leeway.

   I did take the one day seminar at ATR and it was quite an experience
in more ways than one.------- Sue and drove our F350 Club cab from
Richmond Va. to York, Pa. the day before the seminar. For me, the next
day was going to be a BIG day. I woke up at 5 AM, got up and took a
shower at 6. I put on my Mitchum  deodorant, shaved  with a razor- not
the electric job and put on a new pair of jeans, topped off with my gold
and silver Virginia belt buckle. For a 65 year old dude, I LOOKED SHARP.

   Betti, Mark's wife, told me not get there early because they open the
door a few minutes before 9 AM. I'm never late for anything, so I left
at 8:15 and planned on waiting in the parking lot with my tongue
panting.  My hotel was 4 miles form ATR's office.

   First I took the wrong ramp on the highway, picked up a nail and
after 5 miles going the wrong way, I finally turned around and drove on
an almost flat tire. I pulled in their lot, called AAA to fix the  
tire. They didn't. It was still flat when I left ATR at 5 PM.   The  
least of my problems.

   I was overdressed, the only audiophile in the group of 6. All the
others were studio owners, two of which were there to pick up their
ATR's. One was a 1 inch  2 track and the other a 1/4 inch 2 track. 9 to
12  was classroom time on theory; Tom, you said "It's Basic Tape
Recorders and Machine Alignment 101.''
  After lunch, we spent the rest of the day going through all the test
and alignment procedures on the two machines the lucky owners were there
to pick up. We all had the opportunity to perform all the  
adjustments on both machines using the Sound Technology 1510   
Analyzers that ATR employs to set up all their machines.  When you're a
9'th grader in a College class you keep your ears open and your mouth
shut. However, I asked a few questions that were relevant to the the
tasks at hand. With a little studying on the subject, I just might
surprise myself!

   When it came close  to my turn I realized that my Mitchum wasn't
working--the first time. Bill, ATR's tech, was over the shoulder while
each attendee spent the 45 minutes going through the procedures with
detailed explanations as to what was going on. I really should've
recorded the procedure on my Ipod. My turn--- I passed with the excuse
that I'll go through it again when I pick up my machine.  
I'm just old fashioned, but offending someone for the sake of learning
something you've paid to learn, just doesn't compute. My day will
come.---------By the way, the tire was still flat when I left  
the facility at 5 PM,  thanks AAA, and my deodorant was  on holiday.   
I think   next time will be better.

   Ken Fritz


On Jan 21, 2008, at 6:42 PM, Tom Fine wrote

> Hi Ken:
>
> A great place to learn a lot is to take one of ATR Services'  
> seminars. I forgot if you said you had been to one already or not.
>
> Good luck with your endeavors.
>
> -- Tom Fine
>
> ----- Original Message ----- From: "Ken Fritz"  
> <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, January 21, 2008 5:33 PM
> Subject: Re: [ARSCLIST] Ampex ATR-102 opinion (was MD5 Hash Generators
>
>
>>   Hello Mr Fine,
>>
>>   It was gratifying to read your reply as well. It cited additional  
>> views of what it takes to end up with a good machine
>> along with   fortification of the views expressed by Richard Hess.
>>
>>   In 1958, when I was in high school, I purchased a new Ampex 351-2.

>> For a few years,  I recorded bands around the Wisconsin area until  
>> marriage and a few kids eliminated that. I sold the machine and mikes

>> to a good friend of mine who put it in his closet and never used it.

>> Two Christmases ago, while visiting my family in Milwaukee, I called

>> him and bought it back. I always took good care of my things so it  
>> looks just as if it rolled off the Ampex line. It probably has no  
>> more than 1500 hours of use on it. I realize caps need to be replaced

>> after that amount of time and will probably do so at some time. Not  
>> having ANY program material on tape I subscribed to The Tape Project

>> and now have 3 tapes to play. WOW!! ---it's a start!
>>
>>   I realize I need to begin learning about tape recorders and   
>> recording in general. Opinions such as yours are important to someone

>> who has  just about everything to learn.
>>
>>   Thanks, Ken Fritz
>>
>>
>> On Jan 20, 2008, at 8:52 AM, Tom Fine wrote:
>>
>>> I'll second a lot of Richard's thoughts. If I did commercial- master

>>> quality music tape transfers often enough, I'd own an ATR for sure,

>>> and I'd be getting enough $$ from that kind of work to afford a  
>>> professional tech to keep it running. They're not necessarily  
>>> fragile machines, and not really finicky at least as I've noted in  
>>> the limited time I've spent using them, but when they break, it's a

>>> complex electrical-mechanical system that is not for the basement  
>>> tinkerer to fix.
>>>
>>> My pro-grade platform of choice is the Ampex AG-440B, with plenty  
>>> of tweaks to make it run very quiet and sound very smoothly. One  
>>> major tweak for older Ampex decks, by the way, is simply putting in

>>> better heads. For instance, Ampex stock AG-440 era full-track head  
>>> has a bass "bump" and a slight "presence bump" typical of Ampex  
>>> heads. Replace it with a Nortonics or more exotic flavor and  
>>> suddenly you can garner almost ruler-flat frequency response. There

>>> are other tweaks. Anyway, AG-440's are cheap and plentiful and a  
>>> decent basement tinker CAN make one run very well, thus saving the  
>>> pennies for a JRF or IEM headblock restoration/alignment, which I 
>>> consider mandatory for a professional-grade machine restoration.
>>>
>>> I also sing the praises of the Technics 1500 series decks. These   
>>> are gentle on tape, steady on speed, offer a variety of playback   
>>> options and are of fine sound quality (not commercial-music master  
>>> grade but good enough for just about any other content).
>>> I had one  of these decks converted to full-track because I get a 
>>> surprising  number of old brown-oxide 7.5IPS full-track spoken- word

>>> reels to  do. Few machines treat an old tape more gently than the 
>>> Technics transport.
>>>
>>> In the end, though, I think a good transfer/restoration man or   
>>> woman has to rely on their ears and judgement much more than their  
>>> equipment. Talking up one's gear has been the age-old marketing  
>>> dodge for audio folks, and really tells a client very little about  
>>> how good a job you'll do. An excellent body of work can be done on  
>>> what's considered adequate gear and a terrible body of work can be  
>>> done on state-of-the-art ultra-tweaked gear.
>>> What you get when you engage Richard's services is not really the 
>>> roomful of APR's and  Studers. It's his experience and judgement and

>>> proven track record  (and, in Richard's case in particular, his 
>>> willingness to freely  share all kinds of important information and 
>>> advice). Same with me  and anyone else who does good work on this 
>>> list. Something to keep  in mind ... experience and good references 
>>> beat gear lists as a  barometer of good work any day of the week.
>>>
>>> -- Tom Fine
>>>
>>> ----- Original Message ----- From: "Richard L. Hess"   
>>> <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Saturday, January 19, 2008 10:00 PM
>>> Subject: Re: [ARSCLIST] Ampex ATR-102 opinion (was MD5 Hash 
>>> Generators
>>>
>>>
>>>> Hello, Mr. Fritz,
>>>>
>>>> An ATR-102, especially one refurbished my ATR Services in York,   
>>>> PA,  is held in high esteem by many. There are some who are   
>>>> concerned about its use on sticky archival tapes, but it is my 
>>>> understanding it can be properly set up for those tapes and sticky

>>>> tapes should be rendered temporarily non-sticky prior to playing  
>>>> by baking.
>>>>
>>>> I got into this business slowly and began adopting a variety of   
>>>> tape machines that appeared to meet my needs.
>>>>
>>>> It is my goal to do an excellent job with as few different   
>>>> platforms as possible. My current mainstay in reel-to-reel   
>>>> machines are the Studer A80 and the Sony APR-5000.
>>>>
>>>> ATR-102s are very expensive in good condition and while they are  
>>>> superb, I have been able to find refurbishable A80s and excellent  
>>>> condition APRs at much lower prices. My goal is to minimize  
>>>> expenses so
>>>>    (a) I can keep more of the money to run my household
>>>>    (b) keep my pricing competitive and reasonably affordable
>>>>    (c) have some money to feed my location recording, photography,

>>>> and travel hobbies
>>>>
>>>> The APRs are my machine of choice for most formats as they adapt  
>>>> to different formats much easier than most machines. The A80s are  
>>>> my machine of choice for NAB and DIN (Euro) stereo and full-track  
>>>> mono formats of high-quality material as they sound slightly  
>>>> better than the APRs. They are more difficult to change formats  
>>>> on. In fact, I keep one dedicated as NAB playback and a second  
>>>> switches between full-track mono and DIN playback, as needed. I am

>>>> in the process of transforming a third machine into a 15/30  
>>>> machine to handle the few 30 in/s masters I'm currently seeing.
>>>>
>>>> At the very high end, I think the choice of AVAILABLE and   
>>>> MAINTAINABLE machines comes down to: Ampex ATR-100, Studer A80RC,  
>>>> Studer A820/2CH in alpha-numeric order. Each machine has its 
>>>> proponents. I do not lust after the other two as I'm not sure what

>>>> owning them will provide that the A80RC doesn't. The A80 is  
>>>> perhaps the most maintainable longest term as it is a relatively  
>>>> simple machine and all but one of its 31 bearings are stock,  
>>>> standard metric ball bearings.
>>>>
>>>> There are several more esoteric machines, including the Nagra T-  
>>>> Audio, Stellavox, and perhaps some other German (Telefunken?)   
>>>> machines that are not commonly available in North America. The 
>>>> Nagra would be probably the most common of these.
>>>>
>>>> While the difference between the APR and the A80 RC is noticeable,

>>>> I'm not sure any potential further improvement that MIGHT be made  
>>>> by the A820/2CH, the ATR-100, and the others is worth it or could  
>>>> be justified by my client base.
>>>>
>>>> I do find the Studer A810 close to the APR, but in a single blind  
>>>> test that I've run by several people the end result repeatedly is  
>>>> A80, APR-5000, A810 from best to good. I do have specific tasks  
>>>> that I continue to use A810s for as they do certain "stupid tape  
>>>> recorder tricks" better (at least as I have them accessorized)  
>>>> than the APRs. The A80s are not accessorized for many "tricks". I  
>>>> am planning on having varispeed available for them.
>>>>
>>>> I handle half-inch tapes on both the APR-5000s and the APR-16.   
>>>> Some 1/4-inch tapes (specifically 8-channel ones) may be handled  
>>>> in the future by a "FrankenSony" combination of an APR-5000  
>>>> transport and the APR-16 electronics. Four-channel 1/4- inch tapes

>>>> are handled by two "FrankenSony" pairs of APR-5000s.
>>>> 1-inch tapes  are handled on the APR-16. I do not handle 2-inch 
>>>> tapes.
>>>>
>>>> As I said, having a "stable" of different machines is not the   
>>>> mainstay of my equipment strategy. I would rather have one of the  
>>>> best models supported in depth than one each of the three best. I  
>>>> have enough indecision in my life. For 0.150-inch tape,
>>>> my  mainstay is the Nakamichi Dragon, of which I have six, all   
>>>> currently up and running in the studio to do 6x ingest. I also   
>>>> have one each Tascam 234 and 238 machines to handle 4- and 8- track

>>>> cassettes and other oddball formats.
>>>>
>>>> While I have a specially configured A807 for tape prep, it's   
>>>> infrequently used today, and I happily traded my A807 MK II for an

>>>> A80RC. Despite the photos on my website, the current reel-to- reel

>>>> machines in the studio are the APR-16, five APR-5000s, two A80RCs,

>>>> and a Racal Store 4DS and please read all the notes about that  
>>>> machine in my blog before purchasing one.
>>>>
>>>> Cheers,
>>>>
>>>> Richard
>>>>
>>>> At 09:20 PM 2008-01-19, Ken Fritz wrote:
>>>>>    Mr. Hess,
>>>>>
>>>>>     Being an  audiophile, who is  contributing as  much as   
>>>>> possible $ $$ to the music industry, I have one question I'm sure

>>>>> you can address.
>>>>>
>>>>>   I've  navigated your web site with particular attention to your
>>>>> stable of RTR machines. I realize that you need a variety of   
>>>>> machines
>>>>> to accommodate the variety of material supplied to you for 
>>>>> restoration. I've not seen an Ampex ATR machine. It is apparent  
>>>>> to me that  you need more than a  "machine for all seasons"  and 
>>>>> that may be why the ATR isn't in your studio, if it is that.  May 
>>>>> I have your opinion on that machine.
>>>>>
>>>>>   Regards, Ken Fritz --- an audiophile addict.
>>>>
>>>> Richard L. Hess                   email: [log in to unmask]
>>>> Aurora, Ontario, Canada       (905) 713 6733     1-877-TAPE-FIX
>>>> Detailed contact information: http://www.richardhess.com/tape/ 
>>>> contact.htm Quality tape transfers -- even from hard-to-play tapes.

Top of Message | Previous Page | Permalink

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

November 2020
October 2020
September 2020
August 2020
July 2020
June 2020
May 2020
April 2020
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018
October 2018
September 2018
August 2018
July 2018
June 2018
May 2018
April 2018
March 2018
February 2018
January 2018
December 2017
November 2017
October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003

ATOM RSS1 RSS2



LISTSERV.LOC.GOV

CataList Email List Search Powered by the LISTSERV Email List Manager