I've used the particle-board solution from Home Despot (and even Target when
they have them)...but I always add a vertical support reinforcement between
shelves at about 12-inch intervals; usually a piece of 'furring strip' or 1
x 1, in a straight line between shelves, all the way to the bottom. Really
stiffens them up.
Mark Durenberger, CPBE
----- Original Message -----
From: "Tom Fine" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, January 31, 2008 7:37 AM
Subject: [ARSCLIST] Steel shelving
> I'd like to find a better version of this kind of shelf:
> http://tinyurl.com/3xf39d
> at a comparably reasonable price.
>
> The Home Depot shelves are OK but they are not always easy to assemble and
> have plenty of very sharp edges. Does anyone make the old kind of
> bolt-together shelves anymore? Those took more time to assemble but they
> seem less prone to stab/cut the user and as more easily reinforced if one
> wants to exceed specs.
>
> The purpose of these shelves would be to store LPs organized in heavy
> cardboard boxes and 10" reels of tape. Ideally, I'd like a reasonably
> heavy steel shelf bottom but I know from experience that these Home Depot
> particle board bottoms can hold the kind of weight I'd be putting on them,
> and it's easy enough to cut a replacement from hardwood plywood if needed.
> The environment is stable indoor USA northeast. The material is not "save
> from the nuclear blast" archival, just part of my collection. I could make
> do with the Home Depot option since it's cheap and convenient but if
> there's a better quality option for a comparable price I'd take it.
>
> -- Tom Fine
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 2839 (20080131) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
|