How did you modify the load as seen by the cartridge in order to make the
ADC "look" like an ideal phono preamp's load for the chain?  - a y-cable
with a resistor on the unused end, so that the combined Z (of the ADC and
the resistor) equaled the output Z of the cartridge? Or by some other
network?


Andrew


On 8/26/08 1:42 AM, "Scott Phillips" <[log in to unmask]> wrote:

> The loading of the cartridge was one of the first things I checked out.
> As a cartridge is obviously a coil of wire (an inductor) and has
> capacitance, nothing could even start to be right without setting up
> proper loading for the particular cartridge.