Has anyone found any sticky shed (or just shed) on EMTEC SM911?
I have an MRL calibration tape which MRL has graciously identified as
being on EMTEC SM911. I am totally shocked as I thought this was one
of the finest tapes available with little or no history of degradation.
The calibration tape was manufactured 2003-03.
Yes, I know I need to purchase new MRL calibration tapes, but this is
indeed bad news for those tapes that we've recorded on SM911 in that
time period if additional batches are subject to shedding.
The shedding was not advanced, but it definitely affected high
frequency performance by building up on the head during the
calibration process (and introducing response anomalies due to spacing loss).
I have not tried baking it, though I did once bake a much older
(believed to be Ampex) MRL calibration tape and when it went through
their QC process after baking, it still met specification.
All reports would be graciously received.
Richard L. Hess email: [log in to unmask]
Aurora, Ontario, Canada (905) 713 6733 1-877-TAPE-FIX
Detailed contact information: http://www.richardhess.com/tape/contact.htm
Quality tape transfers -- even from hard-to-play tapes.