Hi Corey

I realise this would be a 'trade secret' and so that is why I choose not to
use their product!

Cheers
Marie

On Fri, Dec 18, 2009 at 5:15 PM, Corey Bailey <[log in to unmask]> wrote:

> Hi Folks,
> This thread has moved well beyond yesterday’s replies but I wanted to
> answer two
> of the posts:
>
> Quoting Marie O'Connell <[log in to unmask]>:
>
> <SNIP>
> > Corey, please tell me, what are the ingredients of the Last Factory stuff
> > you use?  Do you know?
>
> Hi Marie
> I have no idea what’s in any of the LAST products. Obviously, for LAST
> Factory
> to release their ingredients would be like a software company releasing its
> source code. When I was considering trying out LAST products, I spent some
> time
> on the phone with a gentleman named Walt Davies and asked all of the usual
> questions I could think of. Mr. Davies assured me that their products were
> safe
> and effective to the point that I decided to invest the $100.00 and try it.
> ~CB
>
> Quoting Steven Smolian <[log in to unmask]>:
> <SNIP>
> > I'm concerned this discussion is omitting a very important point.
> >
> > Unless a tape is soaked in LAST before use or is unwound with a drip of
> LAST
> > falling into the feed reel tape-unwinding crotch, the act of unwinding
> the
> > tape from its storage reel will allow a sticky piece of the tape to pull
> off
> > and adhere to an adjacent layer.
>
> Hi Steven,
> I’ve never used LAST tape lubricant for the purpose of treating Inter-Layer
> Adhesion.
>
> As Richard Hess has pointed out, he has had different results than I have
> with
> LAST products. I will describe the procedure I use in a separate post.
>
> Cheers!
>
> Corey Bailey
> Corey Bailey Audio Engineering
>