What do you think of Diamond Cut DC7 software for restoring old 78's?
Fra: Association for Recorded Sound Discussion List
[mailto:[log in to unmask]] PŚ vegne av Lou Judson
Sendt: 17. januar 2010 23:36
Til: [log in to unmask]
Emne: Re: [ARSCLIST] SV: [ARSCLIST] Adding reverb to old 78's
Here's a dos cetanvos response - I find SoundSoap can be destructive
if used in amounts that are effective - inother words, close to useless.
I have Izotope RX and find it can be remarkably effective, but again
as with all noise redution, moderation is essential. You can reduce
noise only up to the point where it begins to detract from the
desired sounds. And often multiple gentle passes will be more
effective than one severe application. Almost always you want to back
off from the initial settings, in my experience.
I just used RX on a beautiful live recording I did last week to
remove the sound of the hall's lights humming and the AC whooshing.
It can be stunningly effective - in moderation!
Knowing where to stop is part of the art and the vital part of good
ears in the entire process. It's a bit like knowing when the playback
is "good enough" and when it is just showing the warts in the old
I'd rather hear some surfece noise than a dull overprocessed transfer!
On Jan 17, 2010, at 2:21 PM, RaphaŽl Parejo-Coudert wrote:
> I'm actually working on restoration of three old shellac records of
> Navarra Jotas (the first recording of jotas) and I have a lot of
> problems. A lot of the "noise" have the same frequences ranges that
> I would very grateful to Harry explain us what "computer application
> that can actually detect what is music and what is surface noise and
> completely delete the latter without touching the former" ?
> I've tried with Bias SoundSoap Pro 2 denoiser, and also iZotope
> restoration suite. And I have medium results.
> Thank you for your help and answers.