From: Patent Tactics, George Brock-Nannestad
> So, does anyone have a working system that does all of this? If so, can you
> describe your hardware,
> software and extraction methods?
> Also the success and pitfalls you've learned from experience.
> -- Tom Fine
----- you were actually part of the thread of 19 August 2008 that Eric
mentions! I do not suppose much has changed. I would go to the ARSCLIST
archives, but I have not checked recently if they are up and running again.
Please ping me off-list if you would like to have a copy of the thread posts
e-mailed to you.
(based on my own collection of ARSCLIST posts numbering ca. 33800 items
including rejection messages)
> ----- Original Message -----
> From: "Eric Jacobs" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, January 20, 2010 3:19 AM
> Subject: Re: [ARSCLIST] DAT ripping
> > There was a good thread on DAT Transfers on August 19, 2008.
> > In summary:
> > The primary software tools used were DATXtract and DAT2WAV.
> > Transfer with a DDS drive was not possible if ABS was not
> > present.
> > Eric Jacobs
> > The Audio Archive, Inc.
> > tel: 408.221.2128
> > fax: 408.549.9867
> > mailto:[log in to unmask]
> > http://www.TheAudioArchive.com
> > Disc and Tape Audio Transfer Services and Preservation Consulting