Hi Dan,

The way I parse Corey's post:

   Transfer #1: transfer with RIAA EQ
   Transfer #2: transfer with FLAT EQ -> process with
                 outboard analog RIAA EQ
   Transfer #3: transfer with FLAT EQ -> process with
                 digital RIAA EQ

and then compare the three transfers.

Eric Jacobs

The Audio Archive, Inc.
tel: 408.221.2128
fax: 408.549.9867
mailto:[log in to unmask]
http://www.TheAudioArchive.com
Disc and Tape Audio Transfer Services and Preservation Consulting



On Tuesday, March 09, 2010 10:15 PM, Dan Nelson wrote:
> Did i miss somehing ??
> There is no way you can transfer a flat file playing it
> through an RIAA preamp. It will contain low freq boost
> hi freq cut.

My Op-amp Lab pre-amps are actually flat 20 hz to 20k hz.
My Stanton is loaded with 47K and 240 uuf at the pre amp input.
dnelson

--- On Tue, 3/9/10, Corey Bailey <[log in to unmask]> wrote:
>> My plan is to transfer through an RIAA preamp, flat using
>> outboard analog EQ and flat using post EQ via software
>> then comparing the files.