Unfortunately, you cannot simply swap the capstan shaft to change the speed pair. The capstan motor housing is drilled differently for each speed pair to achieve the correct position for the capstan centre, pinch-roller pressure, correct tape-wrap, etc.
A few electronic components also need changing but that's minor compared with "moving the holes" in the capstan motor housing.
All the Best
From: Association for Recorded Sound Discussion List [[log in to unmask]] On Behalf Of Shai Drori [[log in to unmask]]
Sent: 09 May 2010 04:49
To: [log in to unmask]
Subject: Re: [ARSCLIST] Seeking Revox B77 or C274 Slow-Speed Tape Machine...
Don't know if this is helpful but I have a box full of capstan shafts
for Studer revox. I'm sure one of them at least is the right speed or 1
7/8 -3 3/4. Let me know
On 5/8/2010 3:29 AM, Mark Campbell wrote:
> Hi Steve,
> What are the chances of getting one of those ex-Mounty B77 logging machines to Oz?
> Mark Campbell
> Audio Manager
> AIATSIS AV Archives
> Lawson Crescent
> Acton Peninsula
> Canberra ACT 2601
> 61 2 62461141