I should have phrased that differently. Most cassette decks
have an azimuth adjustment somewhere on the transport,
but not designed for operator use.
Commonly that adjustment is a simple screw/thrust spring,
threaded into sheet metal or a casting that is not designed
for frequent use and will wear quickly if so used.
Thank you for the correction and sorry for any confusion.
Fred Thal wrote:
> > You might want to look at the Studer A710 deck as well.
> > It does not have an azimuth adjustment
> This is incorrect.
> The A710 reproduce head azimuth adjustment screw might not be
> prominently identified, but this can perhaps be explained by the
> propensity for users to abuse this adjustment.
> Fred Thal
> ATAE STUDER
> Grass Valley, California