Thanks Corey! Our tech in Wellington is planning to use the most superior
proper plywood, no chipboard will be involved or MDF and he will have them
sealed also. He has said if we can't get them made he will make all 110 of
them himself, he is a bit of a legend. I understand it will be covered by
I appreciate your imput. The crates are for that very purpose, as if we
have to move quickly again (as we will be moving in the future) but need to
be strong and able to be lifted with our lifting device, hence the custom
On Wed, Jan 25, 2012 at 7:48 PM, Corey Bailey <[log in to unmask]>wrote:
> Hi Maria,
> I think if you use "real" plywood, you should be fine. By "real" I mean
> that you should avoid particle board and the varieties of pressed wood
> known as "chipboard". All of the pressed wood varieties use formaldehyde in
> the manufacturing process which is known for out-gassing. Genuine plywood
> that is made from thin (veneer like) layers is also stronger than pressed
> wood. I would go so far as to use exterior grade plywood if the additional
> cost is not prohibitive because it will survive moisture (even getting wet)
> much better than interior grade.
> Since you are in an active earthquake zone, you might consider packing the
> disks as though they are going to be shipped.
> Corey Bailey Audio Engineering
> On 1/24/2012 11:38 AM, Marie O'Connell wrote:
>> I am interested in your thoughts on the use of plywood to make custom made
>> crates to hold our lacquer discs. As most of you are aware, we have been
>> going through an unprecedented number of earthquakes since Sept 4, 2010.
>> We are currently in a temporary location, ground floor level, and have a
>> lease for 2 years.
>> The longer term plan is to move into purpose built premise in the future.
>> The reason for the crates is that we can move them in the future and they
>> will be stored at virtually ground level eliminating the 'falling off
>> shelving' scenario.
>> I have read a few articles about plywood and off-gassing but would like to
>> hear from this wise group about your experience/knowledge of plywood. The
>> other crates we use are strong plastic but have sloping sides so are not
>> ideal or desirable for our disc collection.