I'm sure that this will elicit a lot of responses saying that you can only
do this with an analog filter because of phase shift..... but I regularly
do this if the material is destined for restoration rather than a flat
Being able to de-click and de-crackle the material before the filter allows
you to much more accurately remove ticks and pops. Most times I just use
the filters in DC8 to generate references, but I have clients that want the
analog playback EQ and summing to mono.
The real trick is finding a decent preamp that will allow flat transfer as
well as line level input to the playback EQ.
All the best,
On Tue, Feb 28, 2012 at 10:56 AM, Ron Houston <[log in to unmask]> wrote:
> For another approach:
> Any thoughts about using a completely flat preamp
> fed into a computer via the M-Audio AP192K card
> and then equalized with software such as the Diamond Cut DC7?
> Off-line responses also welcomed.