This is an interesting question. Yes, the Naks work well most of the
time with C-120s, but I am seeing/being asked about enough oddball
cassettes with issues that I think I need something else. I'm looking
for something that will expose the head/tape interface during repro.
The things I am seeing are:
(a) Tapes that were recorded stretched (width ~ 100 mil vs 150 mil standard)
(b) Tapes that wind into a cone and jam in the shell due to differential
(c) Tapes that have folds in them that people would like me to try and
I've had success with 1/2-inch and 1-inch acetate 4- and
8-track tapes that were horrific
with a hand-held velour pressure pad which was very effective.
I turned down cassettes in (c) because I didn't have an out-of-shell
I am also evaluating a more compact and cost-effective approach: the
Sony APR-5000QC <smile>. I have a few spares of those around <smile>.
On 2012-06-25 4:11 AM, Shai Drori wrote:
> Isn't it only for QC of pancakes? Sounds like too much trouble and
> risk. What about your Naks, they give you trouble with c-120? Mine
> work like a dream.
> בתאריך 25/06/12 2:54 AM, ציטוט Richard L. Hess:
>> An A80QC is one option, but expensive and big and has some of its own
Richard L. Hess email: [log in to unmask]
Aurora, Ontario, Canada (905) 713 6733 1-877-TAPE-FIX
Quality tape transfers -- even from hard-to-play tapes.