On 11/06/2012, Shai Drori wrote:

> Hi Dan
> Before I bought the EMT 950 I made a stand out of concrete. Made damn
> good isolation, was a bitch to move (never did). Cost in US$ about 60.
> Could make it look nice as well if you add color or wood panels. Shai
> 
Concrete alone will not absorb vibrations. Concrete plus rubber will.

I have used a paving stone on top of an inner tube, but being so heavy
it was inclined to tilt.

However, there are various commercial mountings for heavy machinery that
could be used. 

The aim is to have a setup whose natural frequency is lower than 0.5 Hz.

Regards
-- 
Don Cox
[log in to unmask]