Hi Dan
Before I bought the EMT 950 I made a stand out of concrete. Made damn
good isolation, was a bitch to move (never did). Cost in US$ about 60.
Could make it look nice as well if you add color or wood panels.
Shai
בתאריך 11/06/12 7:52 PM, ציטוט Daniel Roth:
> Greetings ARSCLIST,
>
> I'm caught in a product mis-information/vague representation issue involving the purchase of the VPI turntable stand (product link here: https://id18536.securedata.net/audiomax-ltd.com/merchantmanager/product_info.php?products_id=219).
>
> Apparently the stand is comprised of three separate pieces. However, no vendor website makes that explicitly clear. The result: I ordered two stands and have no top plates on which to set my Rondine 3 turntables, and no tungsten balls with which to isolate said top plate. I'm now looking at spending an additional $800 above the original $600 spent on the stand bottom. Challenge: See if you can locate any wording in the above link that states there are two (2) additional pieces to purchase if you want this item functional.
>
> Any recommendations on a functional turntable stand and a retailer who can be clear about advertising what is needed to make a complete unit would be greatly appreciated.
>
> Additionally, what amount should be invested in a turntable stand? It is understood that the sky can be the limit, however, I'm seeking real-world input.
>
> Thank you in advance for your consideration.
>
> Dan
>
> ------
> Dan Roth
> Audio Technician
> Walter J Brown Media Archives and Peabody Awards Collection
> Richard B. Russell Special Collections Building
> University of Georgia
>
--
בברכה,
שי דרורי
מומחה לשימור והמרה של אודיו וידאו וסרטים 8-35 ממ.
|