Hello alls also.
I had the same question about 1/2 year ago.
I have hundreds of those woow-woow surface noise Columbias.
I've tried 10 different styli - truncated/full conical, eliptical, etc. (Shure and Stanton) and the GE VRII cartridge with the 3 mil stylus.
...but no luck.
Regards,
Ben Roth
-----Original Message-----
From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Raphaël PAREJO
Sent: Tuesday, October 09, 2012 11:01 AM
To: [log in to unmask]
Subject: [ARSCLIST] What's the best way to remove surface noise on Columbia Shellac (1930)?
Hello alls!
I've a lot difficulties to resolve a problem of surface noise and rumble on a Columbia shellac (circa 1930, electric recording) from San Sebastian (Basque country) factory.
What's the best ways to attenuate or remove this persistant noise ?
I'm working on a Macintosh computer with Peak Pro 7 Editor and several plugins as iZotope RX2, Oxford restoration suite, and also the discontinued SoundSoap Pro 2. The results are not good.
A colleague have tried to use Cedar 3000, but without good results.
Some suggestions?
regards.
--
R. Parejo-Coudert
Ethnomusicologue / Ethnomusicologist / Etnomusicólogo
Anthropologie visuelle et sonore
Visual and Sound Anthropology
Antropología visual y sonora
Archives sonores - Archivos sonoros - Sound Archives Restauration audio - Restauración audio - Audio Restoration
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
|