PLEASE TELL ME
How does one cancel the vertical portion of the signal?
Regards,
Ben Roth
-----Original Message-----
From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Steven Smolian
Sent: Tuesday, October 09, 2012 1:22 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] What's the best way to remove surface noise on Columbia Shellac (1930)?
Are people not cancelling the vertical portion of the signal?
Steve Smolian
-----Original Message-----
From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Mickey Clark
Sent: Tuesday, October 09, 2012 1:11 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] What's the best way to remove surface noise on Columbia Shellac (1930)?
Try a slow transfer at 33 1/3 - at the slower speed, your cartridge will follow the irregularities - it should be all low frequency noise.
-cheers-Mickey Follow me on Twitter https://twitter.com/MickeyRClark M.C.Productions Vintage Recordings
710 Westminster Ave. West
Penticton BC
V2A 1K8
----- Original Message -----
From: "James Roth" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, October 09, 2012 9:07 AM
Subject: Re: [ARSCLIST] What's the best way to remove surface noise on Columbia Shellac (1930)?
> Hello alls also.
>
> I had the same question about 1/2 year ago.
> I have hundreds of those woow-woow surface noise Columbias.
> I've tried 10 different styli - truncated/full conical, eliptical, etc.
> (Shure and Stanton) and the GE VRII cartridge with the 3 mil stylus.
> ...but no luck.
>
> Regards,
> Ben Roth
>
>
> -----Original Message-----
> From: Association for Recorded Sound Discussion List
> [mailto:[log in to unmask]] On Behalf Of Raphaël PAREJO
> Sent: Tuesday, October 09, 2012 11:01 AM
> To: [log in to unmask]
> Subject: [ARSCLIST] What's the best way to remove surface noise on
> Columbia Shellac (1930)?
>
> Hello alls!
>
> I've a lot difficulties to resolve a problem of surface noise and
> rumble on a Columbia shellac (circa 1930, electric recording) from San
> Sebastian (Basque country) factory.
>
> What's the best ways to attenuate or remove this persistant noise ?
>
> I'm working on a Macintosh computer with Peak Pro 7 Editor and several
> plugins as iZotope RX2, Oxford restoration suite, and also the
> discontinued SoundSoap Pro 2. The results are not good.
>
> A colleague have tried to use Cedar 3000, but without good results.
>
> Some suggestions?
>
> regards.
>
> --
> R. Parejo-Coudert
>
> Ethnomusicologue / Ethnomusicologist / Etnomusicólogo
>
> Anthropologie visuelle et sonore
> Visual and Sound Anthropology
> Antropología visual y sonora
>
> Archives sonores - Archivos sonoros - Sound Archives Restauration
> audio - Restauración audio - Audio Restoration
>
>
> °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
> °°
>
|