LISTSERV mailing list manager LISTSERV 16.0

Help for ARSCLIST Archives


ARSCLIST Archives

ARSCLIST Archives


[email protected]


View:

Message:

[

First

|

Previous

|

Next

|

Last

]

By Topic:

[

First

|

Previous

|

Next

|

Last

]

By Author:

[

First

|

Previous

|

Next

|

Last

]

Font:

Monospaced Font

LISTSERV Archives

LISTSERV Archives

ARSCLIST Home

ARSCLIST Home

ARSCLIST  July 2013

ARSCLIST July 2013

Subject:

Re: Bass less reissues from England,U.S. Record club versions

From:

DAVID BURNHAM <[log in to unmask]>

Reply-To:

DAVID BURNHAM <[log in to unmask]>

Date:

Sat, 13 Jul 2013 12:53:35 -0700

Content-Type:

text/plain

Parts/Attachments:

Parts/Attachments

text/plain (119 lines)

You're right on the money, Steve!  I used to entertain my sonically savvy friends by playing them the "Worthy is the Lamb - Amen" chorus from Sargeant's "Messiah" on the US pressed Seraphim release, and then on the English pressed World Record Club version, mastered by Anthony Griffiths.  It doesn't even sound like the same recording!  There are a number of differences but one of them is the lack of bass on the Seraphim version, (of course this has nothing to do with the LP/CD comparison).

db



>________________________________
> From: Steven Smolian <[log in to unmask]>
>To: [log in to unmask]
>Sent: Saturday, July 13, 2013 3:13:03 PM
>Subject: Re: [ARSCLIST] Bass less reissues from England,U.S. Record club versions
>
>
>Please do not accept Angel issues of EMI material from this period as being
>the sonic equivalent of their overseas counterparts. 
>
>At one point I was working on a classical reissue project that had to be
>mastered, by contract, by the Capitol engineering staff in the U.S.  What I
>sent out and what I got back were quite different- less bass from Capitol
>and more compression.  That's what I hear on the U.S. made Angels of this
>period through the mid to late 1980s. 
>
>I suppose some of the later ones are better, but there was one engineer
>there (who handled two of my projects) who acoustically sabotaged wheat I
>sent out.  Both projects were also released on cassettes with much better
>sound.
>
>This may have been done deliberately to minimize returns of records played
>on cheap turntables that could not track bass and that were thus likely to
>be returned as "defective."  I suspect this was true of other company's
>record club issues as well.  I recall  what I was sure at the time was a
>club-distributed copy of S&G's "Bridge Over Troubled Water"  where the bass
>was wimpy as compared with the store-distributed release.
>
>Steve Smolian
>
>
>-----Original Message-----
>From: Association for Recorded Sound Discussion List
>[mailto:[log in to unmask]] On Behalf Of Carl Pultz
>Sent: Saturday, July 13, 2013 1:55 PM
>To: [log in to unmask]
>Subject: Re: [ARSCLIST] Bass less reissues from England
>
>Cleaning up the inbox, I found this kind explanation, somehow missed in
>June. Thank you, John. I had heard about this, but forgot the term, since
>the last time I aligned a tape machine was in 1999. My MRL tape is stashed
>away.
>
>In the same thread, Michael Gray challenged a couple of us to look closer at
>EMI LPs vs. early CDs to see if the perception that the CDs (some at least)
>were shy on bass is valid. Jamie Howarth offered to do analysis. I've kept
>this in mind. Best I could do from my modest collection is Klemperer's
>Beethoven 5, an old Angel/Capitol pressing (S35843, Red spine/baby-blue
>label) vs. the first CD reissue (CDC 7 47187). A/B'ed with a rough match of
>levels, the surprise is how CLOSE they sound to each other.
>
>One comparison isn't enough, of course, and there isn't a heck of a lot of
>low frequencies on either version. My general impression was from when I had
>access to an extensive range of the EMI catalog in both formats. That's long
>gone now, sadly. Happily, I have a much better hifi than in 1985 and digital
>playback has made great strides since then. While looking for comparisons, I
>did find one fascinating item in old and new digital remasterings:
>Barbirolli's V-W Tallis Fantasia. Hearing the old English String Music CD
>reissue vs. the 2000 version in the Great Recordings box set is interesting.
>I think the differences are way beyond what could be attributed to
>differences in A-D converters. (Well, yeah, sure. Fifteen years, lots of
>changes. Maybe a different source.) It was worth the effort - the newer one
>is much better, IMO. Check it out if you can. I don't have it on LP.
>
>-----Original Message-----
>From: Association for Recorded Sound Discussion List
>[mailto:[log in to unmask]] On Behalf Of John Chester
>Sent: Monday, June 03, 2013 11:15 AM
>To: [log in to unmask]
>Subject: Re: [ARSCLIST] Bass less reissues from England
>
>At 08:26 AM 6/3/2013, Carl Pultz wrote:
>>Um, er, - - What? I've never heard of fringing compensation. Please
>>explain, Sir.
>
>See
>http://home.comcast.net/~mrltapes/mcknight_low-frequency-response-calibratio
>n.pdf
>
>If the master tape has no tones, and (or) LF playback EQ is set using a
>full-track alignment tape without compensation for fringing, the actual LF
>response will be too low.
>
>The LF problem is exacerbated if the alignment tape has only one LF tone at
>100 Hz (a lamentable recent trend -- false economy, IMHO).  Setting 100 Hz
>to the same level as 1 kHz is rarely the correct answer.  If the LF tone was
>50 Hz, error would be much smaller.
>
>If playback is being aligned using tones on the master tape, and the only LF
>tone is 100 Hz, same problem.
>
>Once upon a time, most tape machines could record -- but now many are
>playback only.  If the machine can record *and* the track width of the
>record and playback heads are the same *and* the track width of the tape to
>be played matches the playback head, setting LF record-playback response as
>flat as possible is usually the correct answer.  This should be done with a
>continuous frequency sweep, or a method that plots response at 1/3 octave
>intervals or less.
>
>For a playback-only machine, accurate LF calibration requires a DIY
>alignment tape whose track width matches the track width of the tape you
>want to play (which hopefully matches the track width of the playback head).
>This tape should have tones at 1/3 octave intervals or less to give a
>reasonably accurate picture of head bumps.
>
>Graphs showing head bumps at http://www.endino.com/graphs/ Shows why setting
>LF response at any single frequency is often a bad idea.
>
>-- John Chester
>
>
>

Top of Message | Previous Page | Permalink

Advanced Options


Options

Log In

Log In

Get Password

Get Password


Search Archives

Search Archives


Subscribe or Unsubscribe

Subscribe or Unsubscribe


Archives

March 2024
February 2024
January 2024
December 2023
November 2023
October 2023
September 2023
August 2023
July 2023
June 2023
May 2023
April 2023
March 2023
February 2023
January 2023
December 2022
November 2022
October 2022
September 2022
August 2022
July 2022
June 2022
May 2022
April 2022
March 2022
February 2022
January 2022
December 2021
November 2021
October 2021
September 2021
August 2021
July 2021
June 2021
May 2021
April 2021
March 2021
February 2021
January 2021
December 2020
November 2020
October 2020
September 2020
August 2020
July 2020
June 2020
May 2020
April 2020
March 2020
February 2020
January 2020
December 2019
November 2019
October 2019
September 2019
August 2019
July 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018
October 2018
September 2018
August 2018
July 2018
June 2018
May 2018
April 2018
March 2018
February 2018
January 2018
December 2017
November 2017
October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017
February 2017
January 2017
December 2016
November 2016
October 2016
September 2016
August 2016
July 2016
June 2016
May 2016
April 2016
March 2016
February 2016
January 2016
December 2015
November 2015
October 2015
September 2015
August 2015
July 2015
June 2015
May 2015
April 2015
March 2015
February 2015
January 2015
December 2014
November 2014
October 2014
September 2014
August 2014
July 2014
June 2014
May 2014
April 2014
March 2014
February 2014
January 2014
December 2013
November 2013
October 2013
September 2013
August 2013
July 2013
June 2013
May 2013
April 2013
March 2013
February 2013
January 2013
December 2012
November 2012
October 2012
September 2012
August 2012
July 2012
June 2012
May 2012
April 2012
March 2012
February 2012
January 2012
December 2011
November 2011
October 2011
September 2011
August 2011
July 2011
June 2011
May 2011
April 2011
March 2011
February 2011
January 2011
December 2010
November 2010
October 2010
September 2010
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
February 2006
January 2006
December 2005
November 2005
October 2005
September 2005
August 2005
July 2005
June 2005
May 2005
April 2005
March 2005
February 2005
January 2005
December 2004
November 2004
October 2004
September 2004
August 2004
July 2004
June 2004
May 2004
April 2004
March 2004
February 2004
January 2004
December 2003
November 2003
October 2003
September 2003
August 2003
July 2003
June 2003
May 2003
April 2003
March 2003
February 2003
January 2003

ATOM RSS1 RSS2



LISTSERV.LOC.GOV

CataList Email List Search Powered by the LISTSERV Email List Manager