Tom, what you describe about time constants dos not make sense in my experience with RX1, 2, and 3 Advanced. You don't set it in a time-based way; it responds to program material in more or less real time (plus the latency for processing).
If you haven't used it, your error is to be expected, but if you have, then whatever do you mean by time constant?
On Oct 23, 2013, at 5:02 PM, Tom Fine wrote:
> I would think you'd need to constantly tweak the Izotope software because the time constant wouldn't be, well, constant. Print-through is layer-to-layer, so as the tape unwinds, the distance between layers decreases and thus the echo time decreases. I do think very tasteful use of gating is the best way to handle this problem, especially for less-complex source material such as a single voice. You won't get rid of it, but you might make it less anooying without too badly screwing up the dynamics of the voice performance.