I was told by several specialists that the chip cannot be repaired nor is there a way around the problem. The chip has to be replaced. I am not familiar with the SL model so I cannot tell you if it is the same chip that is in the SP-1015.
Cary Ginell
On Oct 8, 2013, at 3:17 PM, David Seubert <[log in to unmask]> wrote:
> Yes. It's very wide wow. But the +/- buttons stopped working first.
>
> David
>
>
> -----Original Message-----
> From: Association for Recorded Sound Discussion List
> [mailto:[log in to unmask]] On Behalf Of Mickey Clark
> Sent: Tuesday, October 08, 2013 3:05 PM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] technics sl-1015 repair
>
> Does the speed go out of control? if so-there is an easy fix. There are
> three solder points under the motor assembly - I re-soldered them and
> corrected the problem-mickey Follow me on Twitter
> https://twitter.com/MickeyRClark M.C.Productions Vintage Recordings
> 710 Westminster Ave. West
> Penticton BC
> V2A 1K8
> http://mcproductions.shawbiz.ca
> ----- Original Message -----
> From: "Cary Ginell" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, October 08, 2013 1:50 PM
> Subject: Re: [ARSCLIST] technics sl-1015 repair
>
>
>> Is the SL the one with the longer tonearm, designed to play 16" discs?
>> If so, I'd say yes.
>>
>> Cary
>>
>>> On Oct 8, 2013, at 1:47 PM, "Jim Sam" <[log in to unmask]> wrote:
>>>
>>> Cary,
>>>
>>> Do you know if the SP-15 is designed the same way and/or uses the
>>> same chip?
>>>
>>> Thanks,
>>> Jim
>>>
>>>
>>>> On Tue, Oct 8, 2013 at 10:34 AM, Cary Ginell <[log in to unmask]>
>>>> wrote:
>>>>
>>>> This caused the downfall of my SP-1015 as well and apparently is a
>>>> common problem with these machines. The chip that controls the speed
>>>> is not made anymore, so the only way you can get one is to
>>>> cannabilize one from another turntable.
>>>>
>>>> Cary Ginell
>>>>
>>>>
>>>> On Oct 8, 2013, at 10:22 AM, David Seubert
>>>> <[log in to unmask]>
>>>> wrote:
>>>>
>>>>> I have a Technics SL-1015 in need of repair. The +/- speed
>>>>> adjustment stopped working a few weeks ago and this week the speed
>>>>> has become unstable. Does anybody know who can repair this?
>>>>>
>>>>>
>>>>>
>>>>> I can ship it, but would prefer someplace in LA.
>>>>>
>>>>>
>>>>>
>>>>> David Seubert
>>>>>
>>>>> UCSB
>>>>
>>
>
|