Thanks Eric - I'Ve been working with ETs for more than 12 years now, and
I'M aware that the ETs I have are mostly glass. I also have "Broadcast
Transcription Discs" by James R. Powell, Jr. and I'Ve done a lot of
research and have already digitized a couple hundred disks. I'M just
updating and upgrading the turn-table. I'Ve encountered most problems
associated with this format including the extruding of binder through the
lacquer/shellac. I probably have somewhere near 10,000 or more of them
and most have been re-housed in archival sleeves and containers.
Thank you very much for your recommendations on styli, and the need for a
16" platter, plus the upgraded tone arm. That's exactly the kind of
information I'M seeking.
Klara Foeller, Curator,
Moving Image & Sound Collections
Missouri History Museum
Library and Research Center
Tel: 314.746.4513 | Fax: 314.746.4548
[log in to unmask] | mohistory.org
On 12/11/13 5:54 PM, "Eric Jacobs" <[log in to unmask]> wrote:
>1. In priority order, the styli you will need are: a 2.5, 2.8 and 2.3 mil
>stylus. Get a "truncated elliptical" stylus shape (as opposed to
>"elliptical" or "conical") if you can. If you can't get "truncated
>elliptical", get "elliptical". We use Expert Stylus in the UK to supply
>our cartridges and styli.
>2. WWII era discs may include glass-base discs (super fragile) that look
>just like aluminum-base discs to the untrained eye - I have some somewhat
>nerdish info here on ETs:
>3. You may want to consider adding a 16-inch platter on top of the 12-inch
>platter - this will reduce resonance of the outer 2 inches of the disc
>during playback. A 16-inch platter can also help with cleaning 16-inch
>glass discs, which are very fragile (see photo albums above).
>4. Consider upgrading to the 12-inch S-260 MK II tonearm for use with the
>Rondine 3 turntable - this will have less tracking error than the S-240
>tonearm, and is the ideal tonearm length for a 16-inch disc. Both the
>S-240 and S-260 tonearms provide vertical adjustment of the tonearm base,
>which will allow using a 16-inch support platter.
>5. Do you have a record cleaning machine that can handle 16-inch discs?
>The Audio Archive, Inc.
>1325 Howard Ave, #906
>Burlingame, CA 94010
>mailto:[log in to unmask]
>Disc and Tape Audio Transfer Services and Preservation Consulting
>On 12/10/13 8:28 AM, "Klara Foeller" <[log in to unmask]> wrote:
>>I'm in the market for an affordable archival turntable, the ET turntable
>>I currently have has a bad bearing and is probably 60 years old. From
>>threads I've read on this listserv, I've been thinking (and looking) at
>>the Rondine 3 turntable. I have some questions and PLEASE guys, don't go
>>all nerdish on me, I won't understand! I just need to know:
>> * Are all Rondine 3s the same with 10" tone arms; large enough for
>>16" ETs (is the platter that large?).
>> * Is a "Rek-O-Cut" Rondine 3 any different? Or is it the same
>> * Am I correct that they adjust to any speed?
>> * Am I correct that they have interchangeable needle cartridges?
>> * What is the optimal needle cartridge for WWII era ET recordings?
>>I'm not sure what's in the machine we're using, but it's been doing an
>> * Any vendor recommendations?
>>I probably won't be digitizing music 78s for a long time; most everything
>>is already available anyway, I'm working mostly on radio, spoken word ET
>>s. Any pertinent observations or recommendations?
>>Klara Foeller, Curator,
>>Moving Image & Sound Collections
>>Missouri History Museum
>>Library and Research Center
>>Tel: 314.746.4513 | Fax: 314.746.4548
>>[log in to unmask] | mohistory.org
>><http://twitter.com/mohistorymuseum> [History Happens Here]
>><http://www.historyhappenshere.org> [You Tube]
[Facebook]<https://www.facebook.com/missourihistorymuseum> [Twitter] <http://twitter.com/mohistorymuseum> [History Happens Here] <http://www.historyhappenshere.org> [You Tube] <http://www.youtube.com/user/MissouriHistory>