I imagine the author or the paper gets a kickback for the specific links and recommendations. Significantly missing is any comment that each of the needed components can be had for anywhere from under $50 to over $5k, depending...
And links work much better if they have <carets> or spaces instead of parentheses:
… at least on my computers.
On Mar 15, 2014, at 8:16 AM, Tom Fine wrote:
> The Music Hall turntable shown is the Chinese ripoff of the Technics 1200, versions of which sold by "Stanton" and Numark drove Technics out of the turntable business a couple years ago. It's an OK mechanism, not as good as Technics but not terrible. I have a "Stanton" version. The tonearm and tonearm-lifter mechanism are not up to Technics standards, but the motor drive is good. If you buy one of these, go get a good heavy rubber mat like Technics used to include, and use a clamp like KAB's, and you'll cut way down on rumble.
> As for the headphones, you can get sound like what is described out of the Grados for $150 with the Audio-Technica ATH-M50. Those are my go-to phones nowadays.
> For a low-cost vinyl playback system along these lines (and you can count on "good enough" sound quality from this rig, make no mistake about that, meaning it'll be fine for the vast majority of listeners), I recommend the Shure M97 cartridge. At $100 or less, it is the best value low-priced cartridge out there. If you want somewhat better and more accurate sound quality, you can't can't beat the Denon DL-110 for $130 or so.
> I can't comment on the AudioEngine speakers or the headphone amp described.
> -- Tom Fine
> ----- Original Message ----- From: "Steve Ramm" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, March 15, 2014 11:04 AM
> Subject: [ARSCLIST] WSJ article on vinyl playbackl equipment
>> Not to start a discussion but for those who don't get the Wall Street
>> Journal you might enjoy reading this if interested in NEW "Home" playback
>> _Svelte Systems for Spinning Vinyl - WSJ.com_
>> Steve Ramm