Could someone use one of these things to do the method you describe, rather than having to find and
then make the space for an old turntable?
They also sell cleaning cloths which I'll say are good for CDs, haven't tried on vinyl:
One thing I DON'T recommend is trying any of the foolish DIY "conversions" for a shop vac into a
record cleaner. I expect you'll ruin a few platters on the way to figuring out that's a bad idea.
There also seems to be some mythology out there on the web about using rubber cement. Good luck with
-- Tom Fine
----- Original Message -----
From: "H D Goldman" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, March 15, 2014 3:10 PM
Subject: Re: [ARSCLIST] WSJ article on vinyl playbackl equipment
> Hi Tom,
> From my perspective, you need to keep in mind that the way fluids are removed is secondary to the
> actual cleaning. Cleaning is performed by the fluid, applicator & method. The same end result
> can be reached whether using vacuum-assisted fluid removal or pure cotton terry cloth rags to wick
> fluid from the groove. An ultrasonic bath is not a substitute for a properly configured blend of
> surfactants. Our own approach has been in public view for over 25 yrs.
> A quart of our QuickWash Record Cleaner w/ 4oz. dispenser [no-rinse required], a single wet
> cleaning brush w/user replaceable pad & a set of cotton drying cloths is less than a Spin-Clean.
> A pint of our premiere product, the Miracle Record Cleaner w/ 4oz. dispenser [makes up 1.5 pints
> working strength], a pair wet cleaning brushes w/user replaceable pads & a set of cotton drying
> cloths are is within several $ of the Spin Cleaner.
> The only other items we recommend for cleaning are an old changer with a rubber mat configured
> with a concentric circle design as a work platform & a vinyl covered dish rack.
> The QW solution is for vinyl pressings only. The MRC has a long track record of superior cleaning
> of lacquer, shellac, acetate, Diamond Disc & vinyl surfaces.
> It's all about setting a standard for the quality of recorded sound ..... it's always been about
> the MUSIC!
> Duane Goldman
> ps we hope to have available a safer & more effective approach to cleaning lacquer masters prior
> to plating before years end.
> On Mar 15, 2014, at 11:49 AM, Tom Fine <[log in to unmask]> wrote:
>> Hi Duane:
>> Agreed that the Spin-Clean is not on par with something like a VPI.
>> So what are your recommendations "for less money"?
>> -- Tom Fine
> H D Goldman Lagniappe Chemicals Ltd.
> PO Box 37066 St. Louis, MO 63141 USA
> v/f 314 205 1388 [log in to unmask]