On 9/19/2014 7:57 AM, Lorna Fulton wrote:
> Its a N/DV 267A- like this:http://www.electrovoice.com/product.php?id=81
> So not a particularly expensive micŠ.

Nor particularly flat -- it has a +6dB peak centered around 8,500Hz.
Very modern-sounding, and it'll probably be too sibilant for good disc
cutting.

I concur with the recommendation of an RE20; it's a very clean
microphone with a reasonably-flat frequency response on- and off-axis.
If you can find a good RE15 on eBay, it has a very flat response -- and
sounds great on just about anything.

Peace,
Paul