On 05/11/2014, Richard L. Hess wrote:
> Hi, Tom,
> In the specs it says its built-in projector lamp is used as the
> scanner illumination and the video shows a band of light going down
> the scan.
> The 3D camera appears to be a parallax type of 3D all in the little
> The i7 4790S has a Passmark score of about 10,000, so it's a pretty
> capable machine. I just bought a machine with a similar processor and
> a 256 G SSD for a non-profit (grant project) to do video oral history
> editing (by students, not me).
> My two hotshot desktops run around 6,000 Passmark scores and the top
> of the line Pentium 4s ran about 500.
> You ask a lot of good questions.
> The buzz on the street is that dedicated scanners are going away now
> that we have 24 and 36 MP DSLRs. Most of the people doing document
> imaging are using DSLRs or mirrorless digital cameras these days, it
And there are rumours of 48 Megapixel cameras (35mm size, not the very
high-priced "medium format" models), which would cover most scanning
from printed matter.
Lighting is bound to be a problem, especially with LP covers which are
covered with plastic film.
> I expect the Sprout to be expensive and a way that HP is trying to go
> against Mac and also create a high-value product that will rise above
> commodity PCs.
> The integration may intrigue some, I don't feel it's necessary for
> many of us, but it certainly looked fast to use.
> On 2014-11-04 8:34 PM, Tom Fine wrote:
>> The HP Sprout:
>> Of course they don't give the full scanning-area dimensions, only
>> inches wide", but I noted that the surface cover sheet sold
>> is 22" by 16", indicating to me that it also covers the border
>> and thus the scanning area is likely 20" by 14". If that is the
>> this may be a very quick and convenient way to scan LP covers,
>> pages, book text, etc. Flatbed scanners are great, but time
>> consuming. I
>> say this as one who has scanned hundreds of LP covers the
>> One thing I wondered about right off is, how much does ambient light
>> effect the scan quality? Must you have exactly-placed light sources
>> you would using a camera stand (the big turnoff about that method).?
>> does this thing have some sort of system where it ignores ambient
>> and only uses whatever light frequency is put out by its LEDs?
>> I'm also not clear how it's a "3D scanner," as the way its
>> in the video indiates nothing like full 3D scanner functionality
>> degree scanning, fractal modelling, etc).
>> -- Tom Fine
[log in to unmask]