Thanks for that Goran! Now it makes sense!
"Normally, the outer layers of tape from the printing signal will receive
more print-through than the inner layers, since the signal must reach the
top of the oxide coating to be noticeable. To reach the top surface of an
outer layer of tape, that signal's magnetic field needs only to pass
base material. To reach the top surface of an inner layer of tape, it must
pass through both the base material and the oxide."
On Fri, Mar 13, 2015 at 6:28 AM, [log in to unmask] <[log in to unmask]>
> > That is the part I don't understand.
> > Why would it propagate outwards
> > more easily than inwards? It's the
> > same distance either way.
> Best regards,
> Goran Finnberg
> The Mastering Room AB
> E-mail: [log in to unmask]
> Learn from the mistakes of others, you can never live long enough to
> make them all yourself. - John Luther
> (")_(") Smurfen:RIP