My output is set up so the proper channels are shown to and from the converter. When I star it, the cursor moves and I sometimes hear a brief fragment of the point from which it starts, after which it is silent. It's very frustrating.

Steve

-----Original Message-----
From: Association for Recorded Sound Discussion List [mailto:[log in to unmask]] On Behalf Of Richard L. Hess
Sent: Wednesday, April 22, 2015 1:14 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] Wavelab 8.5

It might not have its output device set properly. That is a bit convoluted as you set a default device in Windows but you can also set it directly in Wavelab, I think. I have stopped at Wavelab 6. But most software seems to have the same basic options.

Cheers,

Richard



On 2015-04-22 12:58 PM, Steven Smolian wrote:
> Is anyone using Wavelab 8.5? It used to play when the file opened and I
> clicked on the PLAY button. It now shows every sign of doing do the
> meters bounce, etc., but there is no audio. I probably clicked on
> something that caused this but I can't figure out what. Suggestions welcomed.
>
>
>
> Steve Smolian
>
--
Richard L. Hess email: [log in to unmask]
Aurora, Ontario, Canada 647 479 2800
http://www.richardhess.com/tape/contact.htm
Quality tape transfers -- even from hard-to-play tapes.