On 4/19/2015 12:03 PM, Corey Bailey wrote:
> Let's start with the fact that active equalizers make better filters
> than they do gain amplifiers. I proved this on the bench years ago. In
> fact, it caused me to re-think the way I approached recording: listening
> for what I wanted to remove instead of boosting what I thought was lacking.
> When boosting frequencies with an active equalizer (API, MCI, Neve,
> Radial, etc.) you get unwanted phase distortion, not to mention running
> out of headroom if you are talking about the amounts required for record
> EQ. The reason is that, from a design standpoint, the vast majority of
> equalizers used in pro audio equipment (at least, all of those you
> mentioned) have the RC components in the feedback loop. Thus, the phase
> distortion when boosting beyond 3dB or so.
> In the case of record EQ, we are talking about only boosting the low
> frequencies for playback but, that is the area where phase distortion
> can be most difficult to hear. However, it is certainly measurable.
> My $0.02
Corey's right; equalizers indended for recording use usually have
bell-shaped curves, and are 2nd-order. De-emphasis curves for phono
discs are 1st order, and trying to approximate them with recording-type
equalizers is *very* approximate and will indeed lead to phase issues.
Whereas record de-emphasis curves can be implemented accurately using
simple RC filters. With appropriate buffering between them, they get the
amplitude and phase right, to macvh the recorded curve.
This email has been checked for viruses by Avast antivirus software.