Hello Mr. Roth - all I meant is that you can have the cartridge phased
normally i.e. when you play a modern stereo record, it will be correct. You
don't need to physically re-wire your cartridge unless you intend to just
listen to the music. When I'm recording, I have the volume low because I am
more concerned with listening to the final product. When I said out of phase
I meant out of phase for vertical records. I have one turtable I use for
almost all recording and like to keep is simple - I still have about 100
diamond discs - would you like a list? -Mickey
Follow me on Twitter
https://twitter.com/MickeyRClark
M.C.Productions Vintage Recordings
710 Westminster Ave. West
Penticton BC
V2A 1K8
1-250-462-7881
http://mcproductions.ca
----- Original Message -----
From: "James Roth" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, May 05, 2015 10:19 AM
Subject: Re: [ARSCLIST] Playing Edison Diamond discs
> Greetings, Mr. Clark
>
> Thank you for responding to my inquiry.
>
> I'm not quite sure what you meant by "record in stereo (out of phase)".
> Are you referring to the wiring of the cartridge for vertical grooves?
>
> Also, "invert the phase of one channel" and combine for mono.
> I use Sony Sound Forge 9 which has an "Invert/Flip" tool.
> It turns the wave of that channel upside down.
> Is that what I need to do?
> Please explain a little further.
> Thank you.
>
> Ben Roth
>
>
>
>
> -----Original Message-----
> From: Association for Recorded Sound Discussion List
> [mailto:[log in to unmask]] On Behalf Of Mickey Clark
> Sent: Tuesday, May 05, 2015 11:53 AM
> To: [log in to unmask]
> Subject: Re: [ARSCLIST] Playing Edison Diamond discs
>
> If you're using a computer, you can record in stereo (out of phase) , then
> using a wave editor, invert the phase of one channel, then combine for
> mono.
> I know the process - and the sound will be horrible until you combine the
> tracks for mono - then all the noices will miraculously disappear!!! I use
> the same cartridge for modern stereo and verticals - saves a lot of hassle
> to do it this way and you don't need a designated cartridge wired for
> verticals - Mickey Clark
>
>
> Follow me on Twitter
> https://twitter.com/MickeyRClark
> M.C.Productions Vintage Recordings
> 710 Westminster Ave. West
> Penticton BC
> V2A 1K8
> 1-250-462-7881
> http://mcproductions.ca
> ----- Original Message -----
> From: "James Roth" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, May 05, 2015 7:58 AM
> Subject: [ARSCLIST] Playing Edison Diamond discs
>
>
>> Hello everyone,
>>
>> I am transferring Edison Diamond disks.
>> I'm using a Shure M44-7 with a 3.5 FCR stylus from Expert Stylus.
>> I think I've rewired the leads properly for a hill-n-dale groove.
>> The turntable is a Technics Quartz SL 1200 Mk 2.
>> I'm using a KAB Great Sound Escort pre-amp.
>> Still, the sound leaves much to be desired.
>>
>> I'm having an extra hard time transferring the Liszt 2nd Hungarian
>> Rhapsody p/b Rachmaninoff.
>> Any suggestions?
>>
>> Thank you.
>> Ben Roth
>>
>> P.S. I strongly dislike that cadenza of Rachmaninoff! I don't think
>> Liszt
>> would have like it either.
>>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
|