Thanks for the suggestions.
I completely familiar with Blevins and Mara, and I'm sure they would
be pleased to hear the nice things being said about them. But
please, everyone, recall that I asked about someone LOCAL to the
Cincinnati area, or close enough that any travel expenses will be
trivial. In my mind a 4 hour drive isn't trivial and I would charge
for that time. I'm hoping to save this customer that money.
Best,
Jeff
At 08:02 PM 9/11/2015, you wrote:
>I have three Mara machines. He does great work.
>
>Curtis Peoples
>
>Sent from my iPhone
>
> > On Sep 11, 2015, at 6:52 PM, Brian Foraker <[log in to unmask]> wrote:
> >
> > The guy you would want to talk with is Chris Mara in Nashville.
> He probably has more MCI machines than anyone.
> > He rebuilds them from the ground up for a lot of people.
> >
> > Here is a link.
> >
> > http://welcometo1979.com/
> >
> >
> > Brian Foraker
> >> On Sep 11, 2015, at 5:32 PM, Tom Fine wrote:
> >>
> >> Hi Jeff:
> >>
> >> I don't know this for sure, but I bet most of the MCI expertise
> in the country nowadays is centered around Nashville and Florida.
> You might try Randy Blevins to start out:
> >> http://www.blevinsaudio.net/main.htm
> >> I don't know if Randy will send a tech as far as Cincinnati. He
> would know if there's a local tech. By all reports I've heard,
> Randy is a one of the good guys.
> >>
> >> Good luck on getting your machine repaired. I know there are
> some ex-MCI technical guys out there and still active, so it is
> possible to get these machines fixed by experts.
> >>
> >> -- Tom Fine
> >>
> >> ----- Original Message ----- From: "Jeff Brown" <[log in to unmask]>
> >> To: <[log in to unmask]>
> >> Sent: Friday, September 11, 2015 2:14 PM
> >> Subject: [ARSCLIST] Tape machine tech needed near Cincinnati
> >>
> >>
> >>> Hello all,
> >>>
> >>> I hope this is an acceptable post for this list.
> >>>
> >>> Apropos the thread about tape machine techs - I need one now,
> not a decade from now...
> >>>
> >>> Can someone recommend a tech who is qualified to diagnose and
> repair an MCI JH-110b near Cincinnati?
> >>>
> >>> Symptoms: MVC is stuck ON. No transport functions. When the
> tape sensor is blocked, the take up reel spins full speed.
> >>>
> >>> At the least it sounds like he's got a shorted motor drive transistor.
>
> >>>
> >>> I'd take the job myself but the customer would have to cover my
> long distance travel expenses. I'm trying to find him an
> experienced tech who is local, or nearly so.
> >>>
> >>> Thanks,
> >>> Jeff
> >>>
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2015.0.6086 / Virus Database: 4419/10621 - Release Date: 09/11/15
|