Any chance you transferred those Mullin-Palmer tapes at 192/24?
> On Feb 10, 2016, at 9:21 AM, Richard L. Hess <[log in to unmask]> wrote:
>
> Hi, John (and Jamie),
>
> This is such a good philosophy. I am not surprised, but impressed nonetheless.
>
> While there are both model-specific and serial-number-specific variations from the standard, at least picking a standard and sticking with it provides users/analysts down the road a better chance of implementing newer understandings of the process directly on the original digital file. For example, I transferred the Mullin-Palmer tapes with 17.5 µs EQ. We had many discussions (but no reliable data) as to whether Jack's Magnetophons were constant current or what. My contention was we could reliably ensure we were calibrated to the 17.5 µs standard and not to anything else. So, if definitive information became available, or someone wanted to adjust by ear, it would be easy to figure out where the starting point was.
>
> Furthermore, while looking at where the losses occur in tape recording, one might reasonably assume that 50% occur in the recording process and 50% occur in the reproduction process. However, experience seems to tell us that most machines recorded better than they reproduced. That is one of the reasons we can use newer/better machines/system components and extract more from old tapes.
>
> Being somewhat more budget-limited in 1967 or so, and could only afford one decent tape recorder (and both my ears and my back are glad I ended up waiting for an A77 over a Tapesonic) I spoke to a smart engineering student and asked him should I record or play with the better machine, and his response was "record with it, you want to put the best signal possible on the tape." I don't know if he didn't understand that I was referring to copying, but I thought he did. It didn't make sense to me then...if I didn't get the best signal off the tape, no matter what I did I couldn't improve the sound if it was buggered up in the playback.
>
> I think it was after that I started discovering that playback was harder than recording.
>
> Cheers,
>
> Richard
>
> On 2/10/2016 8:33 AM, John Chester wrote:
>> We do not attempt to replicate any deviations from this standard which
>> were characteristic of a particular machine. Our goal is to deliver
>> audio which is as close to the input signal to the recorder as possible.
> --
> Richard L. Hess email: [log in to unmask]
> Aurora, Ontario, Canada 647 479 2800
> http://www.richardhess.com/tape/contact.htm
> Quality tape transfers -- even from hard-to-play tapes.
|