Especially bad for vertical cut transcriptions if unsupported. -Mickey
----- Original Message -----
From: "Corey Bailey" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, June 05, 2016 12:04 PM
Subject: Re: [ARSCLIST] New turntable
> The Rek-O-Kut CVS 16 has a 12" platter like most of the commercially
> available turntables set up to play 16" discs.
> I made the 16" extension to play 16" vinyl discs which are thinner than
> 16" Lacquers. I have no scientific data to suggest that my disc
> extension improves things because I have been unable to come up with a
> 16" vinyl test disc or a suitable disc that would provide repeatable
> test results. Suggestions are welcome.
> On 6/5/2016 11:37 AM, Corey Bailey wrote:
>> Hi Stewart,
>> If you are looking for a turntable to play 16" discs, I would suggest
>> looking for a turntable that has a 16" platter (rare and expensive).
>> Those that claim to be able to play a 16" disc can do so, but leave
>> the outer edge of the disc unsupported and the amount of unsupported
>> disc will vary with platter size. The problem I have with that
>> situation is the resonance of the unsupported area of the disc. I have
>> a Rek-O-Kut CVS 16 that has a 14" platter and my fix was to make a 16"
>> aluminum disc that rests on the 14" platter. The tone arm is able to
>> handle the extra height (barely) without a shim but the set-up is
>> tedious and time consuming to get everything correct and within spec
>> of the turntable which doesn't have the best specs to begin with.
>> Corey Bailey Audio Engineering
>> On 6/5/2016 7:26 AM, Stewart Adam wrote:
>>> I'm planing to update my turntable and looking for suggestions. I
>>> need a turntable the will play
>>> up to 16 inch disks and has a varispeed option from 16 rpm to 90 rpm.
>>> I have been looking at the Rec-O-Kut Rondine 3 as a possibility.
>>> Another option is possibility is
>>> a Technics table. I have been looking at using an SP15 with an
>>> aftermarket plinth and tone arm.
>>> I don't know if the SP15 can currently have the varispeed modified.
>>> Overkill Audio
>>> (overkillinc.com) is working on a mod but they don't have a date for
>>> release yet.
>>> If you have any suggestions I would greatly appreciate them.
>>> Thank you.
This email has been checked for viruses by Avast antivirus software.