Wouldn’t it be better to have a 16” mat? The outer edge of the disc will be unsupported with the smaller mat. I don’t know if it would make a difference, just wondering…
<L>
Lou Judson
Intuitive Audio
415-883-2689
On Jun 6, 2016, at 6:32 AM, Steven Smolian <[log in to unmask]> wrote:
> I use a Technics SP-15. For 16" discs, I had the arm repositioned to give
> me good arm clearance. Since my SME is mounted on the Technics tone arm
> helical twisting base with considerable vertical movement, I had a glass
> shop make a 16" 1/4" plexiglass disc and center it and drill out a hole for
> the spindle to go through. Cost about $ 50.00. I take the rubber mat off
> the turntable and place it on the upper side of the plexiglass disc. Works
> fine.
|