It can be fixed ... Send it to John for a retransfer and we'll handle it. It's routine.
Please pardon the mispellings and occassional insane word substitution I'm on an iPhone
> On Aug 26, 2016, at 6:16 PM, John Chester <[log in to unmask]> wrote:
>> On 8/26/16 4:39 PM, Richard L. Hess wrote:
>> I listened to the clip and then read all the following comments. I had exactly the same thought as Ted. Most of the burbles start with an increase in pitch which indicates a slowing down during recording. My thought was an overly wide tape catching in the guides, but reel flanges or other annoyances could cause it.
> The warbles show up quite clearly in a spectrogram (I'm using Izotope RX5). Each warble starts with a sudden upward change in pitch, followed by a damped sinusoidal pitch oscillation with a period of about 40 milliseconds. Immediately following the initial pitch change, there appears to be a slight loss of tape to head contact for about 10 milliseconds (there's a brief dropout which affects only frequencies above about 2 kHz). Sure does look like the tape was jamming in the recorder. If this was happening during playback, a) the initial pitch jump would be down, not up, and b) I think you'd see a very obvious mechanical disturbance of the tape break arm.
> -- John Chester