I have always folded the tape until I had 10 layers, then divided my
total by ten to get the single layer thickness. I find this helps
reduce measurement variability due to things like changing caliber grip, etc.
At 01:37 PM 8/19/2016, you wrote:
>On 8/19/16 12:47 PM, Melissa Widzinski wrote:
>>1. Tape with a total thickness of approximately 1.77 to 2.13 mils has
>>a nominal base thickness of 1.5 mils.
>>2. Total thickness of approximately 1.27 to 1.51 mils has a nominal
>>1.0 mil base thickness.
>>3. Total thickness of approximately 0.67 to 1.03 mils has a 0.5 mil
>>base thickness-- lower numbers (around 0.7 mils) are triple play tapes
>>while higher numbers (around 1 mil) are double play.
>Dimensions and technical data for 3M tapes:
>for Agfa, BASF and IG Farben tapes:
>-- John Chester
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2016.0.7752 / Virus Database: 4647/12833 - Release Date: 08/18/16