Yes the Tascam uses the felt pad's friction but it also has a little known
sophisticated magnetic clutch/brake on the supply reel for controlled back
tension. It's electronically servo controlled, the only such system I'm
aware of in a cassette machine. So the two systems work together. That's
why I said the Tascam is still partially dependent on the felt pad.
Also in the Tascam the felt pad perfoms another role in forcing the tape to
describe a slightly "M" shaped path across the record and play heads,
"wrapping" the tape around each head's face. Whereas in the Naks there is no
"M" path. The tape travels in a straight line between the record and play
heads, whose faces are angled optimally for this. So with the Naks the felt
pad is not needed for that "M" role either.
----- Original Message -----
From: "Richard L. Hess" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, July 01, 2017 12:07 AM
Subject: Re: [ARSCLIST] Cassette repair question
> While the pressure pad lifter (may I call it that) is a great feature of
> the Naks, it is only part of the story. What enables the pressure pad
> lifter to work is the fact that the tape tension is controlled by the two
> capstans, whereas it sounds as if the Tascam 122's are still using
> friction to generate the back tension.
> I recall my third tape recorder (and my first "real" stereo machine), a
> Tandberg 74B, had an arrangement similar to what Tim describes below. I
> found that unsatisfactory. My next machine was a ReVox A77 and I never
> looked back.
> I don't know how Tandberg cassette machines generate back tension at the
> play head.
> On 2017-06-29 8:19 PM, Tim Gillett wrote:
>> I've serviced Tascam 122 MkII/MkIII's since the early 90's. They're an
>> interesting design in that the play head has a good long life, because
>> in common with most Naks, the felt pressure pad doesnt press against it!
>> But unlike the Naks the pad is not pushed away. The Tascam design
>> displaces the play head a little to the right of the pressure pad so that
>> the pad mostly presses the tape against the record head and a small metal
>> plate between the two heads. The friction creates back tension for good
>> tape contact with the play head.
>> But courtesy of the felt pads, the record head and metal plate wear a
>> lot faster than the play head and before too long the head assembly needs
>> attention, even though the play head itself may still be in excellent
>> condition. With the Naks there isnt this accellerated and uneven head
>> wear. So being still partially dependent on the felt pad, the Tascams
>> although fine machines still have a weakness in this department in my
>> Tim Gillett.
>> Western Australia
> Richard L. Hess email: [log in to unmask]
> Aurora, Ontario, Canada 647 479 2800
> Quality tape transfers -- even from hard-to-play tapes.
This email has been checked for viruses by Avast antivirus software.