Interestingly, the 122 the owner's manual states the pinch roller and
capstan should be cleaned "at least once a day the deck is used"... but
without resorting to extra expedients as we've both described, even as a
techie I'd struggle to perform this basic first line daily maintenance. Even
with the non standard expedients the pinch roller and capstan are still
tricky to clean, and I'd suggest without such expedients, or a custom
machine mod, almost impossible.
Human nature being what it is, unless a basic daily task like this is easy
to perform, it will tend to be skipped. A basic error by Tascam IMO
especially as the machine was marketed and regarded as a pro machine, and
now seems almost a defacto standard for archives and transfer engineers. A
shame as in so many other ways an excellent machine.
----- Original Message -----
From: "Corey Bailey" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, July 21, 2017 2:44 AM
Subject: Re: [ARSCLIST] Much Trouble with my two TASCAM 122 Mk 2s
> Hi Tim,
> As you learned the hard way, this list does not accept attachments and
> will strip them from your post.
> Regarding the picture of the cassette that you posted:
> I have made a few variations of these for those pesky decks where the
> cassette sensor is hard to get to. Generally, I will put a small piece of
> tape across the tape sensor lever (located at the top of the cassette bay)
> to hold it up which allows the transport to function and gives the tech
> full access to the transport mechanism. The modified cassette shell
> certainly makes sense for routine cleaning by non-techies.
> Corey Bailey Audio Engineering
> On 7/19/2017 9:35 PM, Tim Gillett wrote:
>> Attached photo. Nothing fancy in looks but a tool that works.
>> In the Tascam I think both reels also need to be turning to avoid
>> activating "Stop" so I retained the hubs and tape, but with a smaller
>> diameter pack to avoid fouling when cleaning the parts. It makes things
>> easier on various other cassette machines too, especially later models
>> which only go into play mode when a cassette is inserted.
>> I first made a few of these in the 90's when a Talking Book production
>> organisation I worked for bought new Tascam 122 MkIII's and the staff
>> struggled to perform daily tape path cleaning. Of course I regularly use
>> the tool myself.
>> Hope it helps.
>> Western Australia
>> ----- Original Message ----- From: "Shai Drori" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, July 20, 2017 11:59 AM
>> Subject: Re: [ARSCLIST] Much Trouble with my two TASCAM 122 Mk 2s
>> Please upload the picture. Sounds interesting.
>> שי דרורי.
>> מומחה לשימור ודיגיטציה של אודיו וידאו ופילם 8-35ממ
>> Shai Drori
>> Expert digitization services for Audio Video
>> Hi Res scanning for film 8mm-35mm
>> Timeless Recordings Music Label
>> [log in to unmask]
>> Tripadvisor level 5 contributor, level 10 restaurant expert
>> On Thu, Jul 20, 2017 at 4:12 AM, Tim Gillett
>> <[log in to unmask]>
>>> Hi Ben,
>>> There are no belts in that machine, one reel drive idler rubber tyre and
>>> of course a rubber pinch roller. They're usually reliable machines but
>>> getting old and may have had a lot of work.
>>> The tape path needs regular cleaning or tapes may be damaged or jam
>>> inside. Cleaning the capstan and pinch roller is a lot easier with a
>>> dummy cassette to trick the capstan motor to run and engage the pinch
>>> roller in play mode for cleaning. I can upload a photo of a dummy
>>> if that would help.
>>> I service these but unfortunately am in Australia... It may also need a
>>> skilled local serviceman to check it out.
>>> Best of luck
>>> Tim Gillett,
>>> Western Australia
>>> ----- Original Message ----- From: "Martin Fisher"
>>> <[log in to unmask]
>>> To: <[log in to unmask]>
>>> Sent: Thursday, July 20, 2017 5:27 AM
>>> Subject: Re: [ARSCLIST] Much Trouble with my two TASCAM 122 Mk 2s
>>> Check for tight belts and good rubber tires.
>>>> -----Original Message-----
>>>> From: Association for Recorded Sound Discussion List [mailto:
>>>> [log in to unmask]] On Behalf Of 6295LARGE .
>>>> Sent: Wednesday, July 19, 2017 3:23 PM
>>>> To: [log in to unmask]
>>>> Subject: [ARSCLIST] Much Trouble with my two TASCAM 122 Mk 2s
>>>> Hello everybody
>>>> I was cut off from ARSC for about 2 months, because their email was
>>>> rejected by my computer for some reason.
>>>> I have 2 TASCAM 122 Mk 2 recorders.
>>>> They seem to have week mechanisms.
>>>> I was told I can use only high quality cassettes.
>>>> Is that how it should be?
>>>> I don't use junk, but the mechanism struggles and moans, then it stops
>>>> eats the tape.
>>>> The cassettes have gotten stuck in one of them and I had to take off
>>>> cover to make the mechanism give them up.
>>>> Is that how it should be? Maybe the rubber parts need to be cleaned.
>>>> *Are there any service centers for TASCAM in south Florida?*
>>>> Ben Roth
>>> This email has been checked for viruses by Avast antivirus software.