Thanks for your interest, everyone.
Nice catch on the hardware unit, David.
Appreciate the windows Audition 3 tip, Gary (I kind of gave up on the Adobe 2 and 3 angle until I saw that).
And Eero, I appreciate your sharing you experience with the software decoders. I want to learn more about what is meant by "logic" features.
I may not get to work on this much for another few weeks though.
From: Association for Recorded Sound Discussion List <[log in to unmask]> on behalf of Corey Bailey <[log in to unmask]>
Sent: Friday, September 8, 2017 10:42:33 PM
To: [log in to unmask]
Subject: Re: [ARSCLIST] SQ (CBS) Quad Decode
Yore right! My bad. THX for the correction
Corey Bailey Audio Engineering
On 9/8/2017 12:25 PM, Ellis Burman wrote:
> Hi Corey. SQ is a matrix based system using 90 degree phase shifts. It
> doesn't use a carrier. I think you're thinking of the CD-4 system, which
> used a 30 kHz carrier for the front to back difference signals.
> On Fri, Sep 8, 2017 at 11:21 AM, Corey Bailey <[log in to unmask]>
>> I haven't tried the software decoders so I can't comment on them (I'm an
>> analog guy). The early versions of Adobe Audition had some built-in
>> decoders but I think that stopped with Version 3. It makes sense that
>> software would work well, especially for SQ because of the ability to
>> filter out the carrier in the digital domain used by SQ. Tracking a phase
>> encoded signal (QS) that was encoded in the analog domain may be a
>> different story. Using software to decode the stereo analog sound track on
>> motion picture film (Dolby encoded) may give us the answer to the QS
>> Corey Bailey Audio Engineering
>> On 9/8/2017 2:38 AM, Karl E. Fitzke wrote:
>>> SQ Quad