Jamie Howarth:

>how interstitial clips can and do happen and suggested
>a margin of 1.1db below full scale when normalizing.

I use an oversampling peak meter that gives the exact true peak level.

Using a limiter that is NOT oversampling = cannot detect interstitial
clips I see regularly peaks going 2-3 dB above the 0 dB F/S max level.

While the nonoversampling meter only shows -0.1 dB F/S that the
nonoversampling limiter was set too.

If you can live with that fine but I prefer to use a true oversampling
peak limiter to get the levels accurate.


Best regards,

Goran Finnberg
The Mastering Room AB
Goteborg
Sweden

E-mail: [log in to unmask]

Learn from the mistakes of others, you can never live long enough to
make them all yourself.    -   John Luther

(\__/)
(='.'=)
(")_(") Nero & Smurfen:RIP