>how interstitial clips can and do happen and suggested
>a margin of 1.1db below full scale when normalizing.
I use an oversampling peak meter that gives the exact true peak level.
Using a limiter that is NOT oversampling = cannot detect interstitial
clips I see regularly peaks going 2-3 dB above the 0 dB F/S max level.
While the nonoversampling meter only shows -0.1 dB F/S that the
nonoversampling limiter was set too.
If you can live with that fine but I prefer to use a true oversampling
peak limiter to get the levels accurate.
The Mastering Room AB
E-mail: [log in to unmask]
Learn from the mistakes of others, you can never live long enough to
make them all yourself. - John Luther
(")_(") Nero & Smurfen:RIP